Free Shipping On All Orders.
1 13

Talarn Cabinet Pull

$28.00

A brushed-brass knob and pull with a softly contoured classic form — smooth, warm, comfortable to hold.

Protect your investment

See All Benefits

1 Year Extended Warranty

Estimated arrival: , Order within

Product Specifications

Knob — D 1.1" (3 cm) x H 1.1" (3 cm)

Pull bar lengths — 5.9" / 7.2" / 8.4" (all H 1.4")

Hole spacing — 2.5" / 3.7" / 5" / 6.2"

Material — Brass

Finish — Brass

Weight — 61g–175g depending on size

Grip style — Smooth

Application — Cupboards, cabinets, drawers, wardrobes

Installation Guide

No wiring here — just careful measuring, drilling, and mounting. Mortice locks take a bit more patience than a simple knob.

Before you begin

  • Mounting — surface installation on doors, drawers, or cabinetry; check your product's dimensions for placement and drilling points

What you'll need

  • Screwdriver (Phillips and flathead), drill and drill bits, Allen key
  • Tape measure, pencil, level
  • Chisel (for mortice lock installation)
  • Screws and anchors, safety goggles

Step by step

  1. Cabinet hardware — mark drilling points — use a tape measure and pencil; a template helps for uniformity across multiple pieces.
  2. Cabinet hardware — drill holes — use a bit matched to the screw diameter, keeping the drill straight.
  3. Cabinet hardware — mount — insert screws from inside the cabinet or drawer, secure the hardware on the front face, and tighten without overtightening.
  4. Cabinet hardware — align and inspect — confirm straightness and spacing before fully securing.
  5. Thumb lock or dummy handle — confirm orientation — determine left- or right-hand door swing and adjust as needed.
  6. Thumb lock or dummy handle — mark installation height — typically 36–38 inches from the floor to the handle center; align the mounting plate.
  7. Thumb lock or dummy handle — drill and attach — drill pilot holes and secure the backplate and handle with the included screws. Dummy handles install directly, no latch mechanism.
  8. Thumb lock only — install the strike plate — mark the latch location on the door frame, chisel a recess if needed, and screw the strike plate in.
  9. Mortice lock — cut the mortice pocket — use a chisel and drill to create a cavity in the door edge, following the provided measurements.
  10. Mortice lock — insert the lock body — fit it into the cavity and attach through the faceplate with screws.
  11. Mortice lock — install the handle — align the spindle through the lock, attach handles on both sides, and tighten with a screwdriver or Allen key.
  12. Mortice lock — install the cylinder (if applicable) — insert the key cylinder and secure with the cylinder screw from the door edge.
  13. Mortice lock — mount the strike plate — align with the latch mechanism and secure to the door frame.

Good to know

  • Double-check measurements before drilling.
  • Use a level for consistent alignment across multiple units.
  • If you're unfamiliar with mortice installation, consult a locksmith or professional.
  • Make sure all moving parts operate smoothly before final tightening.
  • Dummy handles are decorative or pull-only — they don't engage latches or locks.

Questions about installation or compatibility? Email hey@navadecor.co.

Shipping Time & Returns

We are thrilled to offer shipping worldwide to over 120 countries, ensuring that wherever you are, we can deliver to your doorstep.

Standard Shipping:
Enjoy complimentary standard shipping on all orders! Expect delivery within 15-21 business days from the date of your order.

Priority Processing:
Need your items sooner? Opt for our Priority Processing option at checkout. With Priority Processing, we'll fast-track the manufacturing process of your lighting fixture. Your order will skip the line, resulting in shipping times of approximately 10-20 business days from the date of your order to delivery at your doorstep.

Return Policy:

We want you to love your purchase, which is why we offer a hassle-free return policy. If for any reason you're not completely satisfied with your order, you have 14 days from the date of receipt to initiate a return.

  • Please note that a 20% restocking fee will be applied to any merchandise returned or exchanged that is not due to manufacturer defects or damage.
  • To request a refund or initiate a return, simply email our returns team at hey@navadecor.co. For more details, please review our complete Return Policy.

Brushed brass — warm, never glossy

A brushed finish takes the shine off solid brass without dulling its warmth, leaving a soft, low-glare surface that reads considered rather than showy. Talarn's contoured, classic form pairs naturally with that finish — nothing sharp-edged, nothing that catches the light too hard.

Innovative engineering. Intelligent design.

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Brushed warmth"}]}]}

Brushed warmth

A soft, low-glare brass finish that avoids a polished, glossy look.
{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Classic form"}]}]}

Classic form

Softly contoured detailing suited to traditional and transitional rooms.
{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Comfortable grip"}]}]}

Comfortable grip

Smooth, rounded edges feel considered under the hand every day.

Frequently Asked Questions

What material is the Talarn Knob & Pull Bar made from?

Talarn is made from solid brass with a warm brushed finish, giving it genuine weight and a soft, low-glare surface rather than a polished shine.

What type of finish does this cabinet hardware have?

It has a brushed brass finish, which softens the natural shine of the metal into a warmer, more understated surface that suits everyday use.

Is the Talarn Knob & Pull Bar comfortable to use?

Yes — its softly contoured, rounded form is designed to feel smooth and comfortable in the hand, without any sharp edges or hard corners.

Where can this knob and pull bar be installed?

It suits cabinets, drawers, and wardrobes throughout the home, from kitchens to bathroom vanities, wherever cohesive brass hardware is needed.

Does this design suit modern interiors?

It works especially well in traditional and transitional interiors thanks to its classic contoured form, though its warm brass tone also suits softer contemporary spaces.

What makes the design distinctive?

Its softly contoured classic silhouette and subtle decorative detailing give it a refined, considered look that stands apart from plain, straight-edged hardware.

Is the surface smooth or textured?

The surface is smooth, with a brushed finish rather than a knurled or textured grip — the comfort comes from its rounded, contoured shape.

Will it match other brass hardware?

Yes — its warm brushed brass finish pairs naturally with other brass fixtures and hardware, making it easy to build a cohesive look throughout a kitchen or bathroom.

Is this cabinet hardware durable for long-term use?

Yes — solid brass construction stands up to years of daily handling, and the brushed finish is designed to age gracefully rather than show wear unevenly.

Does it enhance the look of cabinetry?

Yes — its refined, classic detailing adds a cohesive, considered touch to cabinets and drawers, turning a functional detail into part of the room's character.

  • Free shipping

    On all orders, worldwide

  • 1-Year Warranty

    Manufacturer warranty included

  • Easy returns

    Hassle free returns policy

  • Check your order status

    Updates & tracking