Free Shipping On All Orders.
1 7

Setefilla Cabinet Pull

$125.00

A solid brass cup pull with a delicate beaded edge — a classic, grounded silhouette for cabinets and vanities.

Protect your investment

See All Benefits

1 Year Extended Warranty

Estimated arrival: , Order within

Product Specifications

Dimensions — L 9.6cm x W 2.4cm x H 3.5cm

Hole spacing — 7.6cm

Material — Brass

Finish — Vintage Brass

Weight — 110g

Grip style — Smooth

Application — Cupboard, Cabinets, Drawer, Wardrobe

Installation Guide

No wiring here — just careful measuring, drilling, and mounting. Mortice locks take a bit more patience than a simple knob.

Before you begin

  • Mounting — surface installation on doors, drawers, or cabinetry; check your product's dimensions for placement and drilling points

What you'll need

  • Screwdriver (Phillips and flathead), drill and drill bits, Allen key
  • Tape measure, pencil, level
  • Chisel (for mortice lock installation)
  • Screws and anchors, safety goggles

Step by step

  1. Cabinet hardware — mark drilling points — use a tape measure and pencil; a template helps for uniformity across multiple pieces.
  2. Cabinet hardware — drill holes — use a bit matched to the screw diameter, keeping the drill straight.
  3. Cabinet hardware — mount — insert screws from inside the cabinet or drawer, secure the hardware on the front face, and tighten without overtightening.
  4. Cabinet hardware — align and inspect — confirm straightness and spacing before fully securing.
  5. Thumb lock or dummy handle — confirm orientation — determine left- or right-hand door swing and adjust as needed.
  6. Thumb lock or dummy handle — mark installation height — typically 36–38 inches from the floor to the handle center; align the mounting plate.
  7. Thumb lock or dummy handle — drill and attach — drill pilot holes and secure the backplate and handle with the included screws. Dummy handles install directly, no latch mechanism.
  8. Thumb lock only — install the strike plate — mark the latch location on the door frame, chisel a recess if needed, and screw the strike plate in.
  9. Mortice lock — cut the mortice pocket — use a chisel and drill to create a cavity in the door edge, following the provided measurements.
  10. Mortice lock — insert the lock body — fit it into the cavity and attach through the faceplate with screws.
  11. Mortice lock — install the handle — align the spindle through the lock, attach handles on both sides, and tighten with a screwdriver or Allen key.
  12. Mortice lock — install the cylinder (if applicable) — insert the key cylinder and secure with the cylinder screw from the door edge.
  13. Mortice lock — mount the strike plate — align with the latch mechanism and secure to the door frame.

Good to know

  • Double-check measurements before drilling.
  • Use a level for consistent alignment across multiple units.
  • If you're unfamiliar with mortice installation, consult a locksmith or professional.
  • Make sure all moving parts operate smoothly before final tightening.
  • Dummy handles are decorative or pull-only — they don't engage latches or locks.

Questions about installation or compatibility? Email hey@navadecor.co.

Shipping Time & Returns

We are thrilled to offer shipping worldwide to over 120 countries, ensuring that wherever you are, we can deliver to your doorstep.

Standard Shipping:
Enjoy complimentary standard shipping on all orders! Expect delivery within 15-21 business days from the date of your order.

Priority Processing:
Need your items sooner? Opt for our Priority Processing option at checkout. With Priority Processing, we'll fast-track the manufacturing process of your lighting fixture. Your order will skip the line, resulting in shipping times of approximately 10-20 business days from the date of your order to delivery at your doorstep.

Return Policy:

We want you to love your purchase, which is why we offer a hassle-free return policy. If for any reason you're not completely satisfied with your order, you have 14 days from the date of receipt to initiate a return.

  • Please note that a 20% restocking fee will be applied to any merchandise returned or exchanged that is not due to manufacturer defects or damage.
  • To request a refund or initiate a return, simply email our returns team at hey@navadecor.co. For more details, please review our complete Return Policy.

A rim — that frames the whole pull

A fine beaded line runs the full circumference of the Setefilla's cup, a small raised detail that catches light differently from the smooth curved face inside it. That contrast — textured rim against smooth interior — is what keeps the pull from reading as plain, even at this modest scale.

Innovative engineering. Intelligent design.

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Beaded edge"}]}]}

Beaded edge

A fine raised rim frames the cup's face, adding a classic architectural detail.
{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Solid brass"}]}]}

Solid brass

Dense, warm brass that only grows richer in tone the more it's used.
{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Grounded form"}]}]}

Grounded form

The cup sits flush against the door, giving a soft, quiet line even unused.

Frequently Asked Questions

What material is the Setefilla Drawer Pull made of?

Solid brass — not plated — which gives the pull real weight in the hand and allows it to develop a genuine patina with everyday use over time.

What is the weight of the Setefilla Drawer Pull?

It weighs 110 grams, giving it a solid, substantial feel in hand despite its compact 9.6 cm size — a hallmark of true solid-brass construction.

What design style does the Setefilla Drawer Pull have?

A classic cup silhouette with a beaded edge — a timeless shape that reads as traditional up close, while staying simple enough to work in transitional kitchens too.

Does the Setefilla Drawer Pull have any detailing?

Yes — a fine beaded rim runs the full edge of the cup, a subtle raised detail that adds texture and visual interest beyond the smooth curved face.

What finish does the Setefilla Drawer Pull have?

A vintage brass finish, chosen to develop a warm, evolving patina with handling rather than stay static and polished over time.

Is the Setefilla Drawer Pull comfortable to use?

Yes — the smooth cup interior gives a natural, tactile grip point for fingers, comfortable for the dozens of times a day a drawer pull actually gets used.

Where can I use the Setefilla Drawer Pull?

On kitchen cabinets, drawers, wardrobes, and vanities — its classic cup form suits both furniture and fitted cabinetry throughout the home.

What interiors does this drawer pull suit best?

It pairs naturally with painted cabinetry, natural wood finishes, and stone surfaces, fitting comfortably into both traditional and modern hardware schemes.

Why is the Setefilla Drawer Pull a good upgrade for cabinets?

Its solid brass build and beaded detailing bring a timeless, considered accent to otherwise plain cabinetry — a small change with an outsized visual effect.

Why will I love the Setefilla Drawer Pull?

It combines a genuinely solid brass build with a classic, beaded silhouette — a small hardware detail that feels grounded, warm, and built to last for years.

  • Free shipping

    On all orders, worldwide

  • 1-Year Warranty

    Manufacturer warranty included

  • Easy returns

    Hassle free returns policy

  • Check your order status

    Updates & tracking