Chandelier

Paderup Chandelier Crystal leaf accents on branching iron

$2,635
Standard price
$2,239.75 Member price · Save 15% Join now →
✦ Free worldwide shipping on all orders
A linear iron chandelier with crystal leaf-like accents — catching and scattering light across a dining room or long kitchen.
Size
33 Heads: L51.1"(130cm) x H19.6"(50cm) / 33W
41 Heads: L59"(150cm) x H19.6"(50cm) / 41W
Protection plan
1-Year Included
Standard coverage
2-Year +$139
Extended coverage
3-Year +$279
Premium coverage
5-Year +$459
Ultimate coverage
1
Estimated arrival by Aug 11, 2026
Free shipping1-year warranty 14-day returns Order tracking
View spec sheet (PDF)
Specifications
Material
Iron, Crystal
Finish
Brass
Light Source
Integrated LED
Configurations
33 heads L130 cm / 41 heads L150 cm
Height
H50 cm
Output
33W (3630 lm) / 41W (4510 lm)
Cord
Up to 50 cm, adjustable
Canopy
D15 cm
Dimmable
On request
Voltage
90–260V
Sloped Ceiling
Compatible
Installation
Hardwired
The Object

Branches held stillthe crystals catch what moves

The Paderup Chandelier runs on a linear iron frame with branching arms set in a brass finish, each one ending in a small crystal accent that catches and scatters light. The integrated LED runs 33W or 41W across the full length — 130 or 150 cm — so the light is even from end to end rather than pooling at a single point. Clean, ordered, without the sentimentality of a traditional chandelier.
Why you'll love it
  • Crystal leaf accents scatter light across the surrounding room
  • Linear iron frame in brass — 130 or 150 cm to span a long table
  • Integrated LED — 33 or 41W, 50,000-hour rated life
  • Sloped-ceiling compatible, adjustable cord to 50 cm
  • Dimmable on request
Details

A standard hardwired ceiling install — most of it is switching off the power and matching three wires. Set your hanging height before you connect anything, and you're most of the way there.

Before you begin

  • Mounting — to a standard ceiling junction box
  • Power — hardwired to your mains supply
  • Dimming — socketed bulbs dim; integrated-LED models don't
  • Drop — arrives at 47" (1.2 m); want it shorter or longer? Just email us before it ships
  • Ceilings — flat, and most sloped (check the product specs)

What you'll need

  • Screwdriver, voltage tester, wire stripper
  • Wire nuts (included), ladder
  • Drill (only for a new junction box or non-standard ceiling)

Step by step

  1. Turn off the power — switch off the lighting circuit at the breaker, then confirm it's dead with a voltage tester.
  2. Mount the bracket — fasten the included bracket to the junction box, snug and level.
  3. Set your height — before wiring, adjust the cord, chain, or downrod to your drop and lock it at the canopy.
  4. Connect the wires — black to black, white to white, green or bare to ground. Secure each with a wire nut and tuck them into the box.
  5. Attach the fixture — line the canopy up with the bracket and fix it flush with the provided screws or caps.
  6. Add the bulbs — correct type and wattage; if dimming, check the bulbs match your wall dimmer.
  7. Power on and test.

Good to know

  • Follow your local electrical codes.
  • For high or angled ceilings, or anything complex, bring in a licensed electrician.
  • Don't over-tighten decorative parts; dust gently with a soft cloth.

Need a custom drop or have a technical question? We're happy to help — email hey@navadecor.co.

Every order is eligible for customization. Frequently requested:

  • Adjusted hanging or suspension length
  • Custom material finish or paint color
  • Modified light emission color or temperature
  • Dimmer integration
  • Scaled dimensions — larger or smaller
  • Complete fixture redesign to your specifications
Standard shipping

Complimentary worldwide shipping to 120+ countries. Delivery within 21 business days from your order date.

Priority processing

Need it sooner? Add Priority Processing at checkout to fast-track manufacturing — approximately 10–20 business days to delivery.

Returns

14 days from receipt to initiate a return. A 20% restocking fee applies to returns or exchanges not due to defect or damage. To start a return, email .

A standard 1-year manufacturer warranty is included. Extend to 2, 3, or 5 years total coverage at checkout.

Protection coverage
  • Manufacturing defects — faults in materials or workmanship
  • Electrical issues — electrical component failures under normal use
  • Finish defects — premature flaking, pitting or discoloration
  • Not covered — accidental or physical damage, moisture and corrosion, normal wear and tear, and light bulbs
Simple claims process
  1. Contact our support team via email.
  2. Provide your order details and a description of the issue.
  3. Receive a decision within 48 hours. If approved, we ship a replacement at no cost to you.
On the detail

Crystal at the tipwhere the branch ends

Each branch on the Paderup Chandelier terminates in a small crystal accent shaped to catch and refract the LED light below it. The iron frame holds the branches in a disciplined arrangement: equal spacing, consistent angle, nothing reaching too far from the central bar. The brass finish on the iron warms the overall tone without reading gold-heavy. Two lengths, sloped-ceiling compatible.

Innovative engineering · intelligent design
Linear Span

At 130 or 150 cm, the Paderup Chandelier anchors a long dining table or kitchen island with even light from end to end.

Crystal Accents

Crystal leaf tips catch and scatter the integrated LED into small moving points across the ceiling and walls.

Built In Light

Integrated LED means no bulbs to source or swap — 33 or 41W rated to 50,000 hours of use.

In a few words
Branching iron frameCrystal leaf tipsScattered lightLinear spanBrass finish
Frequently asked

The Paderup Chandelier is made from iron with a brass finish for the frame and real crystal for the leaf-like accent tips. Both materials are built for long-term indoor use.

Yes — the Paderup Chandelier uses an integrated LED that's built into the frame. No bulbs to purchase or install separately; the light source is part of the fixture.

Yes — the Paderup Chandelier's linear form is designed for elongated spaces. At 130 or 150 cm, it spans a dining table or kitchen island with even light from end to end.

Two lengths: 130 cm with 33 heads at 33W, and 150 cm with 41 heads at 41W. Both hang 50 cm below the canopy at minimum, with an adjustable cord.

No — the Paderup Chandelier is designed for indoor use only. The iron frame and crystal accents are not rated for moisture or outdoor conditions.

The Paderup Chandelier delivers 3630 lm (33 heads) or 4510 lm (41 heads) — enough for a dining room of 15–25 sq m. Larger spaces may benefit from additional ambient sources.

The Paderup Chandelier is available in brass only — a warm, lightly gold-toned finish on the iron frame that complements both modern and classic dining rooms.

Switch off and allow to cool completely. Wipe the iron frame with a soft dry cloth. Clean the crystal accents with a lightly damp cloth and dry immediately. Polish gently to maintain the brass finish.

Yes — the Paderup Chandelier is sloped-ceiling compatible. The adjustable cord and standard canopy allow installation on angled ceilings without modification.

Yes — installation instructions are included in the box. The Paderup Chandelier is hardwired; we recommend a certified electrician for connection to your ceiling junction box.

Trade program

Design professionals, this one's for you.

Access trade pricing, priority sourcing, and a dedicated account manager. Built for interior designers, architects, and developers procuring at scale.

Apply for trade access →
You may also like
Loading recommendations…
Free worldwide shipping
On every order, no minimum
1-year warranty
Covered against defects
14-day returns
Hassle-free, no questions
Live order tracking
Know exactly where it is