Wall Lamp

Mouguerre Wall Lamp A clean line of light, no glare

$210
Standard price
$178.50Member price · Save 15% Join now →
✦ Free worldwide shipping on all orders
A slim iron bar with a PC diffuser — even, glare-free LED illumination for vanity areas, hallways, and bathrooms, in four lengths.
Size
L16.5"(42cm) x H3.1"(8cm) / 9W
L20.4"(52cm) x H3.1"(8cm) / 12W
L24.4"(62cm) x H3.1"(8cm) / 14W
L28.3"(72cm) x H3.1"(8cm) / 16W
Emitting Color
Trichromatic (No Remote 3000K/4000K/6000K)
Protection plan
1-Year Included
Standard coverage
2-Year +$19
Extended coverage
3-Year +$39
Premium coverage
5-Year +$69
Ultimate coverage
1
Estimated arrival by Oct 4, 2026
Free shipping1-year warranty 14-day returns Order tracking
View spec sheet (PDF)
Specifications
Material
Iron
Finish
Brass
Light source
Integrated LED
Sizes
L16.5" (42 cm), L20.4" (52 cm), L24.4" (62 cm), L28.3" (72 cm) x H3.1" (8 cm)
Wattage
9W (990 lm) / 12W (1320 lm) / 14W (1540 lm) / 16W (1760 lm)
Voltage
90–260VAC
Installation
Wall mount, hardwired
IP rating
IP20
Dimmable
On request
The Object

Linear formsoftened by the diffuser

The Mouguerre Wall Lamp runs a slim brass-finished iron bar across the wall, with a PC diffuser along its length that turns the integrated LED into an even, glare-free line of light. No hotspots, no bare source — just a clean horizontal wash. Four lengths from 42 to 72 cm, IP20 rated, dimmable on request.
Why you'll love it
  • PC diffuser eliminates glare — an even wash of light along the full bar
  • Slim linear form with a geometric brass accent — minimal and clean
  • Iron construction in a brass finish — holds its look over time
  • Four lengths: 42, 52, 62, and 72 cm
  • IP20 rated, dimmable on request — suits bathrooms and hallways
Details

Most wall lamps are a simple bracket-and-wire job — but check your power type first, since hardwired, plug-in, and rechargeable models each install a little differently.

Before you begin

  • Dimming — most socketed lamps dim; integrated-LED models don't
  • Power — hardwired, plug-in, or rechargeable depending on the model; check your product details
  • Mounting — wall-mount, hardware included
  • Indoor/outdoor — confirm your model is rated for outdoor use before installing outside

What you'll need

  • Screwdriver
  • Wire nuts (included for hardwired models)
  • Voltage tester
  • Power drill (for new mounting locations)

Step by step

  1. Identify your power type — hardwired, plug-in, or rechargeable. Follow the steps below for yours.
  2. If hardwired: turn off the power — switch off at your main electrical panel and confirm with a voltage tester.
  3. If hardwired: remove the old lamp — unscrew it and disconnect the wires by removing the wire nuts.
  4. If hardwired: attach the new mounting bracket — align it with your junction box or marked wall location and secure with the included screws.
  5. If hardwired: connect the wires — black to black, white to white, green or bare to ground. Twist and secure with wire nuts, then tuck neatly into the junction box.
  6. If hardwired: mount the fixture — align with the bracket and secure with the provided screws.
  7. If hardwired: install the bulb — correct type and wattage, if your model uses one.
  8. If hardwired: restore power and test.
  9. If plug-in: mount the bracket — with anchors or screws, then attach the fixture and plug it into a nearby outlet. Route the cord neatly.
  10. If rechargeable: mount the bracket — with screws and anchors, fully charge the lamp with the included cable, then install it onto the bracket and power on.

Good to know

  • Follow your local electrical codes.
  • Bring in a licensed electrician if you're unsure.
  • Dust and clean your fixture regularly to keep it looking its best.

Need help with installation or have a product question? Email hey@navadecor.co.

Every order is eligible for customization. Frequently requested:

  • Adjusted hanging or suspension length
  • Custom material finish or paint color
  • Modified light emission color or temperature
  • Dimmer integration
  • Scaled dimensions — larger or smaller
  • Complete fixture redesign to your specifications
Standard shipping

Complimentary worldwide shipping to 120+ countries. Delivery within 21 business days from your order date.

Priority processing

Need it sooner? Add Priority Processing at checkout to fast-track manufacturing — approximately 10–20 business days to delivery.

Returns

14 days from receipt to initiate a return. A 20% restocking fee applies to returns or exchanges not due to defect or damage. To start a return, email .

A standard 1-year manufacturer warranty is included. Extend to 2, 3, or 5 years total coverage at checkout.

Protection coverage
  • Manufacturing defects — faults in materials or workmanship
  • Electrical issues — electrical component failures under normal use
  • Finish defects — premature flaking, pitting or discoloration
  • Not covered — accidental or physical damage, moisture and corrosion, normal wear and tear, and light bulbs
Simple claims process
  1. Contact our support team via email.
  2. Provide your order details and a description of the issue.
  3. Receive a decision within 48 hours. If approved, we ship a replacement at no cost to you.
On the build

Iron bar, PC diffuserone continuous line

The Mouguerre Wall Lamp's PC diffuser is flush with the iron bar, so the finished piece reads as a single slim element on the wall. The integrated LED behind the diffuser produces a consistent wash across the full length — even at 72 cm, there's no visible hotspot or drop-off at the ends.

Innovative engineering · intelligent design
Practical light, precise form.
Glare-free wash

The PC diffuser distributes LED output evenly — comfortable light for vanity areas and mirrors.

Four lengths

42, 52, 62, and 72 cm — match the Mouguerre to your mirror or wall panel exactly.

Bathroom ready

IP20 rated and humidity-tolerant — designed for bathrooms, hallways, and vanity spaces.

In a few words
Glare-freeFour lengthsBrass finishIP20 ratedLinear formDimmable
Frequently asked

The Mouguerre Wall Lamp has a minimalist linear form — a slim horizontal bar with a geometric brass accent. It suits contemporary, Scandinavian, and transitional interiors without drawing attention to itself.

Iron body with a brass finish, and a PC (polycarbonate) diffuser along the front face. The integrated LED is built in — no separate bulbs are needed.

The Mouguerre Wall Lamp delivers a soft, even horizontal wash of light — the PC diffuser eliminates hotspots so the full bar reads as one continuous, glare-free line.

Vanity areas, bathrooms, hallways, and accent walls. The four available lengths let you match it to a mirror, a panel, or a wall section with precision.

Yes — integrated LED from 9W to 16W depending on the length chosen, delivering 990–1760 lm. The 90–260V range means it works on any standard circuit without adapters.

No. The Mouguerre Wall Lamp uses an integrated LED — it's built into the fixture. There are no bulbs to source or replace during normal use.

90–260VAC, covering all standard residential and commercial voltages worldwide. The Mouguerre Wall Lamp works without modification in any country.

Yes — the Mouguerre Wall Lamp is IP20 rated, making it suitable for bathroom walls outside the splash zone. Install above or beside mirrors in vanity areas.

The Mouguerre Wall Lamp mounts to a standard wall bracket with the included hardware. Hardwired to mains — a certified electrician is recommended for the electrical connection.

Brass — a warm, slightly golden finish over the iron body. It reads clean in modern rooms and complements natural materials like wood and stone equally well.

Trade program

Design professionals, this one's for you.

Access trade pricing, priority sourcing, and a dedicated account manager. Built for interior designers, architects, and developers procuring at scale.

Apply for trade access →
You may also like
Loading recommendations…
Free worldwide shipping
On every order, no minimum
1-year warranty
Covered against defects
14-day returns
Hassle-free, no questions
Live order tracking
Know exactly where it is