Free Shipping On All Orders.
1 10

Javea Wall Light

$680.00

A vertical marble-and-copper wall light, elongated and oval — a soft, diffused glow.

Protect your investment

See All Benefits

1 Year Extended Warranty

Estimated arrival: , Order within

Product Specifications

Dimensions — D10cm x W5cm x H46cm

Wattage — 10W (1100lm)

Material — Copper, marble

Finish — White, black, gold

Light source — Integrated LED, bulb included

Dimmable — Upon request

Voltage — 90–260V

Installation — Wall mount

Sloped ceiling compatible — Upon request

Installation Guide

Most wall lamps are a simple bracket-and-wire job — but check your power type first, since hardwired, plug-in, and rechargeable models each install a little differently.

Before you begin

  • Dimming — most socketed lamps dim; integrated-LED models don't
  • Power — hardwired, plug-in, or rechargeable depending on the model; check your product details
  • Mounting — wall-mount, hardware included
  • Indoor/outdoor — confirm your model is rated for outdoor use before installing outside

What you'll need

  • Screwdriver
  • Wire nuts (included for hardwired models)
  • Voltage tester
  • Power drill (for new mounting locations)

Step by step

  1. Identify your power type — hardwired, plug-in, or rechargeable. Follow the steps below for yours.
  2. If hardwired: turn off the power — switch off at your main electrical panel and confirm with a voltage tester.
  3. If hardwired: remove the old lamp — unscrew it and disconnect the wires by removing the wire nuts.
  4. If hardwired: attach the new mounting bracket — align it with your junction box or marked wall location and secure with the included screws.
  5. If hardwired: connect the wires — black to black, white to white, green or bare to ground. Twist and secure with wire nuts, then tuck neatly into the junction box.
  6. If hardwired: mount the fixture — align with the bracket and secure with the provided screws.
  7. If hardwired: install the bulb — correct type and wattage, if your model uses one.
  8. If hardwired: restore power and test.
  9. If plug-in: mount the bracket — with anchors or screws, then attach the fixture and plug it into a nearby outlet. Route the cord neatly.
  10. If rechargeable: mount the bracket — with screws and anchors, fully charge the lamp with the included cable, then install it onto the bracket and power on.

Good to know

  • Follow your local electrical codes.
  • Bring in a licensed electrician if you're unsure.
  • Dust and clean your fixture regularly to keep it looking its best.

Need help with installation or have a product question? Email hey@navadecor.co.

Shipping Time & Returns

We are thrilled to offer shipping worldwide to over 120 countries, ensuring that wherever you are, we can deliver to your doorstep.

Standard Shipping:
Enjoy complimentary standard shipping on all orders! Expect delivery within 15-21 business days from the date of your order.

Priority Processing:
Need your items sooner? Opt for our Priority Processing option at checkout. With Priority Processing, we'll fast-track the manufacturing process of your lighting fixture. Your order will skip the line, resulting in shipping times of approximately 10-20 business days from the date of your order to delivery at your doorstep.

Return Policy:

We want you to love your purchase, which is why we offer a hassle-free return policy. If for any reason you're not completely satisfied with your order, you have 14 days from the date of receipt to initiate a return.

  • Please note that a 20% restocking fee will be applied to any merchandise returned or exchanged that is not due to manufacturer defects or damage.
  • To request a refund or initiate a return, simply email our returns team at hey@navadecor.co. For more details, please review our complete Return Policy.

Veining — visible only once lit

The marble body of the Javea is cut thin enough to pass light rather than block it, so its natural veining stays subtle in daylight and surfaces once the LED switches on. The copper line down the centre keeps the eye moving vertically, reinforcing the slim, elongated form.

Innovative engineering. Intelligent design.

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Diffused glow"}]}]}

Diffused glow

Light passes through the marble itself, producing a soft, even wash rather than a hard point source.
{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Copper accent"}]}]}

Copper accent

A slim centred line of copper adds structural clarity against the pale stone.
{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Sold singly or paired"}]}]}

Sold singly or paired

Works as a single vertical accent or mirrored either side of a mirror or headboard.

Frequently Asked Questions

Is the Javea Wall Light suitable for narrow wall spaces?

Yes — its slim 5cm-wide profile is built for narrow vertical spaces, like beside a doorway, mirror, or headboard, where a wider fixture wouldn't sit comfortably.

What material is the Javea Wall Light made from?

The body is marble, chosen for its natural veining and translucency, paired with a copper accent line that runs down the centre for structural contrast.

What type of light source does it use?

It uses an integrated LED bulb included with the fixture, producing 1100 lumens from 10W — enough for a warm ambient wash without needing a separate task light nearby.

Is the bulb included?

Yes — the integrated LED ships already fitted, so there's nothing extra to source before installation.

What is the wattage and brightness?

The Javea draws 10W and outputs roughly 1100 lumens, tuned for soft ambient light rather than a bright, direct beam — ideal for hallways and bedrooms.

Is the lamp dimmable?

It can be configured for dimming upon request. Let us know when ordering and we'll set it up to work with a standard compatible dimmer switch.

What finishes are available?

White, black, and gold — each pairs the marble body with a different tone for the copper accent and frame, so it can match either a warm or cool room palette.

What voltage does it support?

It runs on 90–260V, covering standard residential current in North America, Europe, Australia, and most other regions without needing a converter.

How is the lamp installed?

It's wall-mounted and hardwired to a standard junction box. We recommend professional installation by a certified electrician to ensure a safe, secure fit.

Is the lamp certified for safety and quality?

Yes — it carries UL, CE, and RoHS certifications among others, meeting recognized international safety and quality standards for residential lighting.

  • Free shipping

    On all orders, worldwide

  • 1-Year Warranty

    Manufacturer warranty included

  • Easy returns

    Hassle free returns policy

  • Check your order status

    Updates & tracking