Wall Light

Yerseke Wall Light Flush to the wall, half-moon glow

$345
Standard price
$293.25 Member price · Save 15% Join now →
✦ Free worldwide shipping on all orders
A gypsum half-moon wall light that sits flush against the wall — soft ambient glow with a seamless, trimless finish.
Size
L11"(28cm) x H7.8"(20cm) / 40W
Protection plan
1-Year Included
Standard coverage
2-Year +$19
Extended coverage
3-Year +$39
Premium coverage
5-Year +$69
Ultimate coverage
1
Estimated arrival by Aug 11, 2026
Free shipping1-year warranty 14-day returns Order tracking
View spec sheet (PDF)
Specifications
Material
Gypsum, metal
Finish
White (paintable)
Light source
LED E14 (replaceable, included)
Output
15W (1500 lm)
Dimensions
L 28 cm x H 20 cm
Weight
7.9 kg
Voltage
90–260V
Installation
Wall mount
Dimmable
On request
The Object

Recessedthe wall and light become one

The Yerseke Wall Light is cast from gypsum and shaped as a half-moon that recesses into the wall surface, with no visible trim or frame. Flush against the plaster, it reads as an architectural detail rather than a fixture — a soft curve of light that you notice without seeing where it comes from. One E14 LED bulb, replaceable; dimmable on request.
Why you'll love it
  • Trimless flush fit — no visible frame, reads as architecture
  • Half-moon gypsum form — can be painted to match the wall
  • Soft ambient output — warm, even glow for evenings
  • Replaceable E14 LED — standard fitting
  • Dimmable on request — 90–260V worldwide
Details

Most wall lamps are a simple bracket-and-wire job — but check your power type first, since hardwired, plug-in, and rechargeable models each install a little differently.

Before you begin

  • Dimming — most socketed lamps dim; integrated-LED models don't
  • Power — hardwired, plug-in, or rechargeable depending on the model; check your product details
  • Mounting — wall-mount, hardware included
  • Indoor/outdoor — confirm your model is rated for outdoor use before installing outside

What you'll need

  • Screwdriver
  • Wire nuts (included for hardwired models)
  • Voltage tester
  • Power drill (for new mounting locations)

Step by step

  1. Identify your power type — hardwired, plug-in, or rechargeable. Follow the steps below for yours.
  2. If hardwired: turn off the power — switch off at your main electrical panel and confirm with a voltage tester.
  3. If hardwired: remove the old lamp — unscrew it and disconnect the wires by removing the wire nuts.
  4. If hardwired: attach the new mounting bracket — align it with your junction box or marked wall location and secure with the included screws.
  5. If hardwired: connect the wires — black to black, white to white, green or bare to ground. Twist and secure with wire nuts, then tuck neatly into the junction box.
  6. If hardwired: mount the fixture — align with the bracket and secure with the provided screws.
  7. If hardwired: install the bulb — correct type and wattage, if your model uses one.
  8. If hardwired: restore power and test.
  9. If plug-in: mount the bracket — with anchors or screws, then attach the fixture and plug it into a nearby outlet. Route the cord neatly.
  10. If rechargeable: mount the bracket — with screws and anchors, fully charge the lamp with the included cable, then install it onto the bracket and power on.

Good to know

  • Follow your local electrical codes.
  • Bring in a licensed electrician if you're unsure.
  • Dust and clean your fixture regularly to keep it looking its best.

Need help with installation or have a product question? Email hey@navadecor.co.

Every order is eligible for customization. Frequently requested:

  • Adjusted hanging or suspension length
  • Custom material finish or paint color
  • Modified light emission color or temperature
  • Dimmer integration
  • Scaled dimensions — larger or smaller
  • Complete fixture redesign to your specifications
Standard shipping

Complimentary worldwide shipping to 120+ countries. Delivery within 21 business days from your order date.

Priority processing

Need it sooner? Add Priority Processing at checkout to fast-track manufacturing — approximately 10–20 business days to delivery.

Returns

14 days from receipt to initiate a return. A 20% restocking fee applies to returns or exchanges not due to defect or damage. To start a return, email .

A standard 1-year manufacturer warranty is included. Extend to 2, 3, or 5 years total coverage at checkout.

Protection coverage
  • Manufacturing defects — faults in materials or workmanship
  • Electrical issues — electrical component failures under normal use
  • Finish defects — premature flaking, pitting or discoloration
  • Not covered — accidental or physical damage, moisture and corrosion, normal wear and tear, and light bulbs
Simple claims process
  1. Contact our support team via email.
  2. Provide your order details and a description of the issue.
  3. Receive a decision within 48 hours. If approved, we ship a replacement at no cost to you.
On the detail

Gypsum flushpainted over, nearly invisible

The Yerseke is cast in a single gypsum piece with no metal trim on the face — which means it can be skimmed and painted to match the surrounding wall once fitted. From across the room, only the half-moon curve of light is visible; the fixture itself disappears into the plaster. The E14 bulb sits behind a shallow recess, not visible from standard viewing angles.

Innovative engineering · intelligent design
Trimless fit

No visible frame — the gypsum body can be painted to match the wall around it.

Soft glow

The half-moon recess contains and directs a warm ambient wash — not a beam.

Replace easily

Standard E14 fitting — source a replacement from any lighting supplier.

In a few words
Flush fitHalf-moonGypsum bodyNo trimAmbient glow
Frequently asked

Yes, on request — specify at checkout and we configure the fixture with a dimmable driver before shipping. Compatible with standard trailing-edge LED dimmers once set up.

An E14 LED bulb, included in the box. The E14 is a standard fitting — replacement bulbs are available from any lighting or hardware supplier when needed.

The body is cast gypsum — the same material as architectural plaster mouldings, which is why it can be painted and sanded once fitted. The internal bracket and wiring housing are metal.

Yes — the flush half-moon form is well suited to hallways, where wall space is limited and a projecting fixture would get knocked. It also works well in bedrooms and living rooms as an ambient accent.

Yes — it is designed to recess slightly into the wall surface. The gypsum body can be filled, sanded, and painted over the edges so the transition between fixture and wall is invisible.

90–260V — compatible with North American and European mains without an adaptor. Confirm local voltage requirements with your electrician before installation.

One — a single E14 LED, included in the box. The single source is sufficient for ambient accent use; the gypsum half-moon shape diffuses and distributes the output.

The included E14 LED emits warm white light. You can change the colour temperature by sourcing an alternative E14 bulb in cool white or daylight — the fitting accepts any standard E14.

Yes — one E14 LED bulb is included. It is also replaceable, so when it eventually dims you can fit a standard E14 from any supplier without any special tools or parts.

Yes — the gypsum half-moon has a small access point for bulb replacement. The E14 bulb unscrews and a replacement fits in its place. Nava ships free worldwide, typically 15–21 business days, with a 1-year warranty.

Trade program

Design professionals, this one's for you.

Access trade pricing, priority sourcing, and a dedicated account manager. Built for interior designers, architects, and developers procuring at scale.

Apply for trade access →
You may also like
Loading recommendations…
Free worldwide shipping
On every order, no minimum
1-year warranty
Covered against defects
14-day returns
Hassle-free, no questions
Live order tracking
Know exactly where it is