Chandelier

Suede Chandelier Alabaster arms reaching a metre across

$1,960
Standard price
$1,666 Member price · Save 15% Join now →
✦ Free worldwide shipping on all orders
A wide alabaster and iron chandelier with integrated LEDs — the stone glows from within, warm and diffused, across a 1-metre span.
Protection plan
1-Year Included
Standard coverage
2-Year +$69
Extended coverage
3-Year +$139
Premium coverage
5-Year +$229
Ultimate coverage
1
Estimated arrival by Aug 11, 2026
Free shipping1-year warranty 14-day returns Order tracking
View spec sheet (PDF)
Specifications
Dimensions
L100 x W100 x H10 cm
Material
Alabaster Marble, Iron
Finish
Black
Light source
Integrated LED
Dimmable
No
Voltage
90–260V
Installation
Pipe erected
Cord length
Up to 50 cm
Sloped ceiling
Compatible
The Object

Spread across the ceilinglit from within the stone

The Suede Chandelier is built from alabaster marble set on an iron frame, spanning a full metre across the ceiling. When lit, the stone doesn't reflect the source — it absorbs it and radiates warmth evenly outward. Integrated LEDs are sealed into the frame on a pipe-erected suspension, sloped-ceiling compatible and adjustable to 50 cm drop.
Why you'll love it
  • Alabaster marble glows from within — warm, diffused, never harsh
  • Generous 1-metre span fills a dining room or entryway
  • Integrated LEDs — nothing to replace, nothing exposed
  • Black iron frame with pipe-erected suspension
  • Sloped-ceiling compatible, cord adjustable to 50 cm
Details

A standard hardwired ceiling install — most of it is switching off the power and matching three wires. Set your hanging height before you connect anything, and you're most of the way there.

Before you begin

  • Mounting — to a standard ceiling junction box
  • Power — hardwired to your mains supply
  • Dimming — socketed bulbs dim; integrated-LED models don't
  • Drop — arrives at 47" (1.2 m); want it shorter or longer? Just email us before it ships
  • Ceilings — flat, and most sloped (check the product specs)

What you'll need

  • Screwdriver, voltage tester, wire stripper
  • Wire nuts (included), ladder
  • Drill (only for a new junction box or non-standard ceiling)

Step by step

  1. Turn off the power — switch off the lighting circuit at the breaker, then confirm it's dead with a voltage tester.
  2. Mount the bracket — fasten the included bracket to the junction box, snug and level.
  3. Set your height — before wiring, adjust the cord, chain, or downrod to your drop and lock it at the canopy.
  4. Connect the wires — black to black, white to white, green or bare to ground. Secure each with a wire nut and tuck them into the box.
  5. Attach the fixture — line the canopy up with the bracket and fix it flush with the provided screws or caps.
  6. Add the bulbs — correct type and wattage; if dimming, check the bulbs match your wall dimmer.
  7. Power on and test.

Good to know

  • Follow your local electrical codes.
  • For high or angled ceilings, or anything complex, bring in a licensed electrician.
  • Don't over-tighten decorative parts; dust gently with a soft cloth.

Need a custom drop or have a technical question? We're happy to help — email hey@navadecor.co.

Every order is eligible for customization. Frequently requested:

  • Adjusted hanging or suspension length
  • Custom material finish or paint color
  • Modified light emission color or temperature
  • Dimmer integration
  • Scaled dimensions — larger or smaller
  • Complete fixture redesign to your specifications
Standard shipping

Complimentary worldwide shipping to 120+ countries. Delivery within 21 business days from your order date.

Priority processing

Need it sooner? Add Priority Processing at checkout to fast-track manufacturing — approximately 10–20 business days to delivery.

Returns

14 days from receipt to initiate a return. A 20% restocking fee applies to returns or exchanges not due to defect or damage. To start a return, email .

A standard 1-year manufacturer warranty is included. Extend to 2, 3, or 5 years total coverage at checkout.

Protection coverage
  • Manufacturing defects — faults in materials or workmanship
  • Electrical issues — electrical component failures under normal use
  • Finish defects — premature flaking, pitting or discoloration
  • Not covered — accidental or physical damage, moisture and corrosion, normal wear and tear, and light bulbs
Simple claims process
  1. Contact our support team via email.
  2. Provide your order details and a description of the issue.
  3. Receive a decision within 48 hours. If approved, we ship a replacement at no cost to you.
On the stone

Alabasternot reflecting light, holding it

Alabaster marble is semi-translucent: a bare LED inside it disappears, replaced by a steady, warm emanation from the surface of the stone itself. The Suede's metre-wide span means that warmth reaches a wide area rather than a single point. The black iron frame gives the stone a quiet, grounded edge.

Innovative engineering · intelligent design
Glows through

Semi-translucent alabaster turns integrated LEDs into a warm surface glow.

Wide reach

A 1-metre span covers a full dining table or entryway without a second fitting.

Nothing to change

Integrated LEDs are sealed into the frame — no bulbs to source or replace.

In a few words
Alabaster marble1-metre spanIntegrated LEDWarm diffused glowBlack iron frame
Frequently asked

The Suede operates on 90–260V AC and is hardwired to a standard ceiling junction box with a pipe-erected suspension. It is compatible with most residential electrical setups worldwide.

For a certified electrician, installation typically takes 1–2 hours. Given the 1-metre span and pipe suspension system, we recommend professional fitting rather than DIY.

Alabaster is porous — dust it gently with a dry soft cloth and avoid moisture or liquid cleaners that can stain or erode the stone surface over time.

The standard Suede is not dimmable. If dimming is important to you, contact us before ordering and we'll advise on whether a dimmer-compatible configuration is available.

Yes — the Suede uses a pipe-erected ceiling suspension and is hardwired to mains. We strongly recommend installation by a certified electrician for both safety and a level hang.

The Suede uses integrated LEDs sealed into the alabaster and iron frame. There are no replaceable bulbs — the LEDs are built in for the fixture's lifetime.

Yes — the Suede comes with a 1-year warranty as standard, extendable to 2, 3, or 5 years. Contact us after purchase to add extended cover.

Because the light passes through semi-translucent alabaster rather than a bare bulb, the glow is soft, warm, and evenly diffused — ideal for dining rooms, entryways, and living spaces where you want atmosphere over brightness.

Yes — the cord adjusts to 50 cm drop, keeping the Suede at an appropriate height in rooms with standard and higher ceilings. Sloped ceilings are also compatible.

Nava Decor offers 14-day returns from delivery on undamaged items in original packaging. Contact us within 14 days of receipt and we'll arrange the return process.

Trade program

Design professionals, this one's for you.

Access trade pricing, priority sourcing, and a dedicated account manager. Built for interior designers, architects, and developers procuring at scale.

Apply for trade access →
You may also like
Loading recommendations…
Free worldwide shipping
On every order, no minimum
1-year warranty
Covered against defects
14-day returns
Hassle-free, no questions
Live order tracking
Know exactly where it is