Ceiling Light

Sarmilik Ceiling Light Iron disc, vintage glow, any room

$90
Standard price
$76.50 Member price · Save 15% Join now →
✦ Free worldwide shipping on all orders
A compact iron ceiling light with a vintage-modern character — replaceable E27 bulb, warm or white light, in black, gold, or white.
Color
Black
Gold
White
Size
D9.8"(25cm)
Protection plan
1-Year Included
Standard coverage
2-Year +$9
Extended coverage
3-Year +$19
Premium coverage
5-Year +$29
Ultimate coverage
1
Estimated arrival by Aug 11, 2026
Free shipping1-year warranty 14-day returns Order tracking
View spec sheet (PDF)
Specifications
Material
Iron
Finish
Black, Gold, White
Dimensions
D25 cm
Canopy
D10 cm
Light source
LED E27 (replaceable, included), 15W (1,500 lm)
Installation
Hardwired
Sloped ceiling
Compatible
Dimmable
No
Voltage
90–260V
The Object

Vintage warmthin a compact iron disc

The Sarmilik Ceiling Light is a 25 cm iron disc that hangs close to the ceiling and looks at home in a corridor, bedroom, or kitchen. It takes a standard E27 bulb — warm or white — in a fixture that reads as vintage without committing to it. Black, gold, or white finish; sloped-ceiling compatible; 50,000 hours from the included LED bulb.
Why you'll love it
  • Compact 25 cm form — fits hallways, bedrooms, kitchens
  • Replaceable E27 bulb — easy to swap, widely available
  • Warm or white light mode from the included LED
  • Three finishes: black, gold, white
  • Sloped-ceiling compatible · 50,000 hr bulb life
Details

A close-to-ceiling install for low-clearance rooms — power off, mount the bracket, match the wires, done.

Before you begin

  • Mounting — direct to a standard ceiling junction box; sits close against the ceiling
  • Dimming — most socketed models dim; integrated-LED models don't
  • Ceilings — flat ceilings only; for vaulted or sloped ceilings, look at semi-flush or pendant options instead
  • Power — hardwired to your home's electrical system

What you'll need

  • Screwdriver, voltage tester, wire stripper
  • Wire nuts (included), ladder
  • Drill (only for a new junction box or non-standard ceiling)

Step by step

  1. Turn off the power — shut it off at the breaker panel and confirm with a voltage tester.
  2. Remove the fixture cover — twist or unclip the outer shade or base cover to expose the mounting plate and wiring.
  3. Install the mounting bracket — attach it to the ceiling junction box with the supplied screws, secure and level.
  4. Connect the wires — black to black, white to white, green or bare to ground. Secure each with a wire nut and tuck them into the junction box.
  5. Attach the fixture base — lift into place, align with the bracket, and secure with the provided screws so it sits flush against the ceiling.
  6. Reattach the cover — twist, clip, or fasten the decorative cover or diffuser back on.
  7. Restore power and test.

Good to know

  • Great for standard or low ceilings — hallways, bedrooms, closets.
  • Confirm your junction box can support the fixture's weight.
  • Follow local electrical codes.
  • When in doubt, bring in a licensed electrician.

Still need help? Email hey@navadecor.co.

Every order is eligible for customization. Frequently requested:

  • Adjusted hanging or suspension length
  • Custom material finish or paint color
  • Modified light emission color or temperature
  • Dimmer integration
  • Scaled dimensions — larger or smaller
  • Complete fixture redesign to your specifications
Standard shipping

Complimentary worldwide shipping to 120+ countries. Delivery within 21 business days from your order date.

Priority processing

Need it sooner? Add Priority Processing at checkout to fast-track manufacturing — approximately 10–20 business days to delivery.

Returns

14 days from receipt to initiate a return. A 20% restocking fee applies to returns or exchanges not due to defect or damage. To start a return, email .

A standard 1-year manufacturer warranty is included. Extend to 2, 3, or 5 years total coverage at checkout.

Protection coverage
  • Manufacturing defects — faults in materials or workmanship
  • Electrical issues — electrical component failures under normal use
  • Finish defects — premature flaking, pitting or discoloration
  • Not covered — accidental or physical damage, moisture and corrosion, normal wear and tear, and light bulbs
Simple claims process
  1. Contact our support team via email.
  2. Provide your order details and a description of the issue.
  3. Receive a decision within 48 hours. If approved, we ship a replacement at no cost to you.
On the detail

Iron discthe right size for any room

At 25 cm, the Sarmilik is deliberate about its scale — small enough for a hallway or bedroom without looking undersized, substantial enough to read as a considered fixture rather than a filler. The E27 socket means you can dial in the warmth or brightness with the bulb you choose; the included LED is a starting point, not a constraint.

Innovative engineering · intelligent design
Vintage character

A disc form with classic proportions — vintage-adjacent without being decorative-retro.

Replaceable E27

Standard socket means you choose the bulb — swap for a different warmth or wattage.

Three finishes

Black, gold, and white — the Sarmilik shifts register with a finish change.

In a few words
Iron discE27 socketVintage tone3 finishesSloped ceiling25 cm
Frequently asked

The Sarmilik is made from iron in a black, gold, or white finish. The light source is a standard E27 LED bulb — included in the box and replaceable when needed.

The Sarmilik mounts to a standard ceiling junction box with the included hardware. A mounting bracket and junction box are included. Professional installation by a certified electrician is recommended.

Yes — the vintage-inflected iron disc form works in period homes as naturally as in contemporary ones. The black or gold finish in particular suits older interior palettes.

Yes — the Sarmilik includes a 1-year Nava Decor warranty, extendable to 2 or 3 years. It ships free worldwide with delivery in approximately 15–21 business days.

The included E27 LED runs at 15W (1,500 lm) — efficient for an everyday ceiling light. The E27 socket means you can also swap in a lower-wattage bulb if you prefer.

The included LED bulb is rated to 50,000 hours. When it eventually needs replacing, any standard E27 LED will fit — no proprietary part required.

Yes — the 25 cm disc form suits hallways, bedrooms, kitchens, corridors, and smaller living areas. It also works in a villa or gallery space as a simple accent ceiling piece.

The included LED offers warm and white light modes. The fixture itself does not have a built-in dimmer — choose a dimmable E27 bulb and a compatible wall dimmer to add that functionality.

The iron disc form references vintage ceiling roses and flush-mount pendants, but the proportions and the clean circular canopy keep it from reading as reproduction. It bridges both aesthetics without committing to either.

Yes — wipe the iron surface with a dry or lightly damp cloth. No special cleaning products are needed. Replace the E27 bulb with the power off when the time comes.

Trade program

Design professionals, this one's for you.

Access trade pricing, priority sourcing, and a dedicated account manager. Built for interior designers, architects, and developers procuring at scale.

Apply for trade access →
You may also like
Loading recommendations…
Free worldwide shipping
On every order, no minimum
1-year warranty
Covered against defects
14-day returns
Hassle-free, no questions
Live order tracking
Know exactly where it is