Ceiling Lamp

Saimaa Ceiling Lamp Stone frame, marble diffuser, soft ceiling

$900
Standard price
$765 Member price · Save 15% Join now →
✦ Free worldwide shipping on all orders
A ceiling lamp that pairs a travertine frame with a marble diffuser — natural stone that gentles the light into a warm, even glow overhead.
Size
D22.8"(58cm) x H4"(10cm) / 12W
Protection plan
1-Year Included
Standard coverage
2-Year +$39
Extended coverage
3-Year +$79
Premium coverage
5-Year +$129
Ultimate coverage
1
Estimated arrival by Aug 10, 2026
Free shipping1-year warranty 14-day returns Order tracking
Specifications
Material
Travertine, Marble
Light source
Integrated LED (built-in)
Installation
Ceiling hardwired
Suitable for
Living rooms, bedrooms, entryways, offices
The Object

Lightsoftened through stone

The Saimaa Ceiling Lamp sets a travertine frame around a marble diffuser, so the light passes through stone before it reaches the room. The result is warm and diffused — no bare source, no hard edge. Travertine shows its grain; the marble carries the glow. Together they bring the kind of quiet presence that works in a bedroom, a living room, or an entryway without calling attention to itself.
Why you'll love it
  • Marble diffuser — light passes through stone, not plastic
  • Travertine frame shows natural organic texture
  • Warm, even glow with no visible source
  • Minimalist form suits contemporary and transitional interiors
  • Ceiling-hardwired · no bulb to replace
Details

A close-to-ceiling install for low-clearance rooms — power off, mount the bracket, match the wires, done.

Before you begin

  • Mounting — direct to a standard ceiling junction box; sits close against the ceiling
  • Dimming — most socketed models dim; integrated-LED models don't
  • Ceilings — flat ceilings only; for vaulted or sloped ceilings, look at semi-flush or pendant options instead
  • Power — hardwired to your home's electrical system

What you'll need

  • Screwdriver, voltage tester, wire stripper
  • Wire nuts (included), ladder
  • Drill (only for a new junction box or non-standard ceiling)

Step by step

  1. Turn off the power — shut it off at the breaker panel and confirm with a voltage tester.
  2. Remove the fixture cover — twist or unclip the outer shade or base cover to expose the mounting plate and wiring.
  3. Install the mounting bracket — attach it to the ceiling junction box with the supplied screws, secure and level.
  4. Connect the wires — black to black, white to white, green or bare to ground. Secure each with a wire nut and tuck them into the junction box.
  5. Attach the fixture base — lift into place, align with the bracket, and secure with the provided screws so it sits flush against the ceiling.
  6. Reattach the cover — twist, clip, or fasten the decorative cover or diffuser back on.
  7. Restore power and test.

Good to know

  • Great for standard or low ceilings — hallways, bedrooms, closets.
  • Confirm your junction box can support the fixture's weight.
  • Follow local electrical codes.
  • When in doubt, bring in a licensed electrician.

Still need help? Email hey@navadecor.co.

Every order is eligible for customization. Frequently requested:

  • Adjusted hanging or suspension length
  • Custom material finish or paint color
  • Modified light emission color or temperature
  • Dimmer integration
  • Scaled dimensions — larger or smaller
  • Complete fixture redesign to your specifications
Standard shipping

Complimentary worldwide shipping to 120+ countries. Delivery within 21 business days from your order date.

Priority processing

Need it sooner? Add Priority Processing at checkout to fast-track manufacturing — approximately 10–20 business days to delivery.

Returns

14 days from receipt to initiate a return. A 20% restocking fee applies to returns or exchanges not due to defect or damage. To start a return, email .

A standard 1-year manufacturer warranty is included. Extend to 2, 3, or 5 years total coverage at checkout.

Protection coverage
  • Manufacturing defects — faults in materials or workmanship
  • Electrical issues — electrical component failures under normal use
  • Finish defects — premature flaking, pitting or discoloration
  • Not covered — accidental or physical damage, moisture and corrosion, normal wear and tear, and light bulbs
Simple claims process
  1. Contact our support team via email.
  2. Provide your order details and a description of the issue.
  3. Receive a decision within 48 hours. If approved, we ship a replacement at no cost to you.
On the stone

Marblethe diffuser that glows

Marble and travertine both come from the same geological family — calcium-carbonate stone — but they behave differently as diffusers. The Saimaa uses marble for its translucency, letting warm light pass through and scatter softly, while the travertine outer frame holds the form. Neither material is decorative; both are structural.

Innovative engineering · intelligent design
Stone diffuser

Marble transmits light rather than blocking it — the glow is warm and spread, never harsh.

Travertine frame

Natural travertine shows its grain and texture — no two Saimaa lamps are identical.

Calm overhead presence

Low-profile form keeps the lamp close to the ceiling — unobtrusive, always on.

In a few words
Travertine frameMarble diffuserWarm glowNo visible bulbHardwiredMinimalist
Frequently asked

The Saimaa uses natural travertine for the outer frame and real marble for the diffuser. Both are natural stone — no composites or plastics in the light-bearing elements.

An integrated LED built into the fixture — included and ready to use. Nothing to buy separately, nothing to source or replace for the life of the lamp.

Yes — the Saimaa works in bedrooms, living rooms, entryways, dining areas, and office spaces. The stone materials keep it versatile across contemporary and transitional interiors.

Warm and even. The marble transmits light rather than reflecting it, scattering the glow softly across the room without any visible hotspot or bare-bulb effect.

Dimming compatibility can be configured on request — let us know at checkout. The Saimaa ships with a standard integrated LED; dimmer-ready setups are available.

The Saimaa is ceiling-hardwired to a standard junction box. Professional installation by a certified electrician is recommended for a secure, level fit.

Exact dimensions aren't listed in the current specification sheet. Contact us before ordering if precise measurements are critical for your space and we'll confirm them.

The LED is integrated and built in — not user-replaceable. It's rated to 50,000+ hours, so it should outlast most refurbs or redecorations before any service is needed.

Minimal. Wipe the travertine and marble surfaces with a dry or lightly damp cloth. Avoid acidic or abrasive cleaners that can etch natural stone. Dust the fixture periodically.

Yes — travertine and marble sit naturally in contemporary, Scandinavian, and transitional interiors. The stone tones (cream, beige, warm grey) work across most neutral palettes.

Trade program

Design professionals, this one's for you.

Access trade pricing, priority sourcing, and a dedicated account manager. Built for interior designers, architects, and developers procuring at scale.

Apply for trade access →
You may also like
Loading recommendations…
Free worldwide shipping
On every order, no minimum
1-year warranty
Covered against defects
14-day returns
Hassle-free, no questions
Live order tracking
Know exactly where it is