Wall Lamp

Rig Wall Lamp Stick it up, pick the tone

$55
Standard price
$46.75 Member price · Save 15% Join now →
✦ Free worldwide shipping on all orders
A rechargeable cordless wall lamp on a magnetic holder — three colour temperatures, touch-controlled, no wiring required.
Color
White
Pink
Green
White - with Remote Control
Pink - with Remote Control
Green - with Remote Control
Size
L12.6"(32cm) x H1.6"(4cm)
Protection plan
1-Year Included
Standard coverage
2-Year +$9
Extended coverage
3-Year +$19
Premium coverage
5-Year +$29
Ultimate coverage
1
Estimated arrival by Sep 17, 2026
Free shipping1-year warranty 14-day returns Order tracking
View spec sheet (PDF)
Specifications
Material
Plastic, Acrylic
Finish
White, Green, Pink
Dimensions
L32 cm x H4 cm
Weight
200–212 g
Light source
Integrated LED, 9W, 5V
Battery
2,000 mAh
Runtime
3–20 hrs (full charge)
Installation
Adhesive magnetic mount
Dimmable
Yes (touch control)
Voltage
5V (USB-C)
The Object

Cordlessjust press and go

The Rig Wall Lamp sticks to the wall with its magnetic holder — peel, press, and it's done, no drilling, no electrician. Tap to cycle through warm, neutral, and white light; long-press to dial in the brightness. A full charge lasts 3–20 hours. The slim acrylic bar sits close to the wall, clean and minimal, in white, green, or pink.
Why you'll love it
  • No wiring — magnetic holder sticks to any wall surface
  • Three colour temperatures: warm, neutral, white
  • Touch control — tap to switch, long-press to dim
  • Rechargeable via USB-C, 3–20 hrs per charge
  • Flicker-free integrated LED · 50,000 hrs
Details

Most wall lamps are a simple bracket-and-wire job — but check your power type first, since hardwired, plug-in, and rechargeable models each install a little differently.

Before you begin

  • Dimming — most socketed lamps dim; integrated-LED models don't
  • Power — hardwired, plug-in, or rechargeable depending on the model; check your product details
  • Mounting — wall-mount, hardware included
  • Indoor/outdoor — confirm your model is rated for outdoor use before installing outside

What you'll need

  • Screwdriver
  • Wire nuts (included for hardwired models)
  • Voltage tester
  • Power drill (for new mounting locations)

Step by step

  1. Identify your power type — hardwired, plug-in, or rechargeable. Follow the steps below for yours.
  2. If hardwired: turn off the power — switch off at your main electrical panel and confirm with a voltage tester.
  3. If hardwired: remove the old lamp — unscrew it and disconnect the wires by removing the wire nuts.
  4. If hardwired: attach the new mounting bracket — align it with your junction box or marked wall location and secure with the included screws.
  5. If hardwired: connect the wires — black to black, white to white, green or bare to ground. Twist and secure with wire nuts, then tuck neatly into the junction box.
  6. If hardwired: mount the fixture — align with the bracket and secure with the provided screws.
  7. If hardwired: install the bulb — correct type and wattage, if your model uses one.
  8. If hardwired: restore power and test.
  9. If plug-in: mount the bracket — with anchors or screws, then attach the fixture and plug it into a nearby outlet. Route the cord neatly.
  10. If rechargeable: mount the bracket — with screws and anchors, fully charge the lamp with the included cable, then install it onto the bracket and power on.

Good to know

  • Follow your local electrical codes.
  • Bring in a licensed electrician if you're unsure.
  • Dust and clean your fixture regularly to keep it looking its best.

Need help with installation or have a product question? Email hey@navadecor.co.

Every order is eligible for customization. Frequently requested:

  • Adjusted hanging or suspension length
  • Custom material finish or paint color
  • Modified light emission color or temperature
  • Dimmer integration
  • Scaled dimensions — larger or smaller
  • Complete fixture redesign to your specifications
Standard shipping

Complimentary worldwide shipping to 120+ countries. Delivery within 21 business days from your order date.

Priority processing

Need it sooner? Add Priority Processing at checkout to fast-track manufacturing — approximately 10–20 business days to delivery.

Returns

14 days from receipt to initiate a return. A 20% restocking fee applies to returns or exchanges not due to defect or damage. To start a return, email .

A standard 1-year manufacturer warranty is included. Extend to 2, 3, or 5 years total coverage at checkout.

Protection coverage
  • Manufacturing defects — faults in materials or workmanship
  • Electrical issues — electrical component failures under normal use
  • Finish defects — premature flaking, pitting or discoloration
  • Not covered — accidental or physical damage, moisture and corrosion, normal wear and tear, and light bulbs
Simple claims process
  1. Contact our support team via email.
  2. Provide your order details and a description of the issue.
  3. Receive a decision within 48 hours. If approved, we ship a replacement at no cost to you.
How it works

Magnetic mountremove, recharge, replace

The holder adheres to the wall once; after that, the lamp lifts off to charge and snaps back on. Touch the surface to cycle temperatures — warm for evening winding down, white for reading. The 2,000 mAh battery runs up to 20 hours on a single USB-C charge.

Innovative engineering · intelligent design
No electrician

The adhesive magnetic mount goes up in seconds — no drilling or hardwiring.

Touch to control

Tap to switch between three colour temperatures; long-press to adjust brightness.

Recharge and go

USB-C charging included; runs 3–20 hours on a full 2,000 mAh battery.

In a few words
No wiringMagnetic holdTouch controlUSB-C charge3 tonesFlicker-free
Frequently asked

Yes — stick the magnetic holder to the wall with the included adhesive tape, then snap the lamp onto it. No drilling, no hardwiring, no tools needed. Takes under a minute.

The Rig Wall Lamp's 2,000 mAh battery lasts between 3 and 20 hours depending on brightness setting and colour temperature — more at lower brightness, less at full white.

Yes — long-press the touch surface to step through brightness levels. It's a smooth, intuitive control that doesn't require any app or remote.

Three: warm (for evenings), neutral (for everyday), and white (for reading or tasks). Tap once to cycle through them in sequence.

Yes — the integrated LED produces a steady, flicker-free light. No strobe effect at any brightness level, which makes it comfortable for extended use.

Yes — a 1 m USB-C cable is included in the box. Plug it into any standard USB-C charger or power bank to top up the battery.

Tap the touch control surface once to cycle through warm, neutral, and white. A second tap moves to the next setting; long-press adjusts brightness.

The adhesive is designed for long-term wall mounting. For best results, apply to a clean, dry surface. The lamp itself lifts away for charging without disturbing the holder.

The integrated LED is rated to 50,000 hours — many years of regular use. There's nothing to replace; the lamp itself is the light source.

Yes on both counts. The Rig is completely cordless once charged — lift it off the magnetic holder and take it to any room. Recharge via USB-C whenever needed.

Trade program

Design professionals, this one's for you.

Access trade pricing, priority sourcing, and a dedicated account manager. Built for interior designers, architects, and developers procuring at scale.

Apply for trade access →
You may also like
Loading recommendations…
Free worldwide shipping
On every order, no minimum
1-year warranty
Covered against defects
14-day returns
Hassle-free, no questions
Live order tracking
Know exactly where it is