Wall Panel

Renney Wall Panel Flexible PVC tile, any wall surface

$150
Standard price
$127.50 Member price · Save 15% Join now →
✦ Free worldwide shipping on all orders
A lightweight PVC wall panel in bright or matte white — waterproof, fire-resistant, and simple to apply with glue or tape.
Size
Bright White: L20"(50cm) x H20"(50cm)
Matte White: L20"(50cm) x H20"(50cm)
Double Sided Tape: D9"(23cm) x W2"(5cm)
Quantity
4 Pieces
Protection plan
1-Year Included
Standard coverage
2-Year +$19
Extended coverage
3-Year +$39
Premium coverage
5-Year +$69
Ultimate coverage
1
Estimated arrival by Aug 10, 2026
Free shipping1-year warranty 14-day returns Order tracking
View spec sheet (PDF)
Specifications
Material
PVC
Finish
Bright White, Matte White
Panel dimensions
L 50 cm x W 50 cm (each)
Double-sided tape dimensions
D 23 cm x W 5 cm
Suitable areas
Living room, bedroom, kitchen, dining room, bathroom, office
Installation
Adhesive glue or double-sided tape
The Object

Laid flatthe wall changes quietly

The Renney Wall Panel is a 50 x 50 cm PVC tile that glues or double-side-tapes directly to the wall — no fixings, no specialist tools. Flexible enough to conform to curved or uneven surfaces; waterproof enough for bathrooms and kitchens; fire-resistant for peace of mind. Choose bright white or matte white. Clean with a wipe; remove with care when needed.
Why you'll love it
  • Flexible — conforms to curved or uneven wall surfaces
  • Waterproof — suits bathrooms, kitchens, and humid areas
  • Fire-resistant construction for added safety
  • Glue or double-sided tape install — no tools needed
  • Recyclable PVC — an environmentally considered choice
Details

Three ways to install, depending on your panel — nail gun, peel-and-stick, or glue-on. Pick the one that matches what you ordered.

Before you begin

  • Prep — walls should be clean, dry, and smooth; remove dust, grease, nails, and flaky paint
  • Layout — measure and mark your starting line with a level and pencil, and lay out panels on the floor first to visualize placement

What you'll need

  • Tape measure, level, pencil or chalk line
  • Utility knife or fine-tooth saw, clean cloth
  • Caulk gun (if using adhesive), rubber roller (for peel-and-stick), brad nail gun (for nail gun install)

Step by step

  1. Nail gun — for thicker or heavier panels like wood/MDF. Locate wall studs with a stud finder and mark them.
  2. Nail gun — start at the bottom corner and align your first panel to your guidelines.
  3. Nail gun — fasten into studs — nails every 12–16".
  4. Nail gun — fit remaining panels tightly together and continue fastening. Fill nail holes with wood filler or color-matched putty. Optionally, add caulk between panels for seamless joints. Leave a 1/8" gap at edges for expansion.
  5. Peel-and-stick — for lightweight panels with pre-applied adhesive. Wipe the wall clean of dust and grease and let it dry fully. Measure and draw a level starting line.
  6. Peel-and-stick — peel and place — remove the adhesive backing from the first panel, align carefully, and press onto the wall starting at one edge.
  7. Peel-and-stick — roll it flat — use a rubber roller to apply even pressure, then continue placing panels tightly against each other. Avoid repositioning — the adhesive is strongest on first contact.
  8. Glue-on — for panels without adhesive, like solid PVC, composite, or acoustic. Clean the wall surface thoroughly.
  9. Glue-on — apply adhesive in an "S" or zig-zag pattern on the back of the panel.
  10. Glue-on — press into place — align to your guide marks and press firmly against the wall. Use painter's tape to hold it if needed.
  11. Glue-on — repeat and finish — continue with remaining panels, keeping spacing even and level. Wipe away any adhesive squeeze-out with a damp cloth. Let adhesive cure 24–48 hours before applying pressure or weight.

Questions about which install method fits your panel? Email hey@navadecor.co.

Every order is eligible for customization. Frequently requested:

  • Adjusted hanging or suspension length
  • Custom material finish or paint color
  • Modified light emission color or temperature
  • Dimmer integration
  • Scaled dimensions — larger or smaller
  • Complete fixture redesign to your specifications
Standard shipping

Complimentary worldwide shipping to 120+ countries. Delivery within 21 business days from your order date.

Priority processing

Need it sooner? Add Priority Processing at checkout to fast-track manufacturing — approximately 10–20 business days to delivery.

Returns

14 days from receipt to initiate a return. A 20% restocking fee applies to returns or exchanges not due to defect or damage. To start a return, email .

A standard 1-year manufacturer warranty is included. Extend to 2, 3, or 5 years total coverage at checkout.

Protection coverage
  • Manufacturing defects — faults in materials or workmanship
  • Electrical issues — electrical component failures under normal use
  • Finish defects — premature flaking, pitting or discoloration
  • Not covered — accidental or physical damage, moisture and corrosion, normal wear and tear, and light bulbs
Simple claims process
  1. Contact our support team via email.
  2. Provide your order details and a description of the issue.
  3. Receive a decision within 48 hours. If approved, we ship a replacement at no cost to you.
How it's made

PVC compositethe flexibility is structural

The Renney Wall Panel's flexibility comes from its PVC composition — a material that bends around corners and uneven surfaces without cracking or creasing. The same material gives it waterproofing and fire resistance as built-in properties, not surface treatments. Both bright white and matte white finishes are produced from the same base compound — only the surface gloss level differs.

Innovative engineering · intelligent design
Three properties built into every Renney Wall Panel.
Curves too

Flexible PVC conforms to uneven or curved walls that rigid tiles can't cover.

Waterproof

Suitable for bathrooms, kitchens, and any area with regular moisture exposure.

Easy clean

PVC surface wipes clean with a damp cloth — no special products or sealants.

In a few words
Flexible PVCWaterproofFire-resistantTape or glueEasy clean
Frequently asked

The Renney Wall Panel is made from PVC — a flexible, durable composite that is both waterproof and fire-resistant as intrinsic material properties. No surface coating is needed to achieve these characteristics.

Please confirm the quantity per box with us at checkout — pack sizes vary by order. Contact the Nava Decor team and we'll advise on how many packs you need to cover your wall area before you place an order.

Each Renney Wall Panel measures 50 x 50 cm. This is a standard square format that aligns cleanly in both grid and offset layouts. The double-sided tape accessory measures 23 x 5 cm.

Yes — the PVC composition is flexible enough to conform to gently uneven or curved surfaces. This makes the Renney Wall Panel suitable for older plaster walls or curved architectural features that rigid tiles would bridge over.

Yes — the Renney Wall Panel is fully waterproof. PVC does not absorb moisture, making these panels suitable for bathrooms, kitchens, laundry rooms, and other areas with regular exposure to water or humidity.

Yes — the PVC material used in the Renney Wall Panel has inherent fire-resistant properties. This provides an added level of safety in kitchens and other areas where fire risk is a consideration in wall covering choice.

Apply adhesive glue or double-sided tape (included) to the back of each Renney Wall Panel and press firmly against the wall surface. No specialist tools or drilling required. Clean the wall surface before installation for the best adhesion.

The Renney Wall Panel is made from recyclable PVC. At end of life, panels can be taken to a PVC recycling facility. Choosing recyclable materials is one way the product reduces its environmental footprint compared to non-recyclable alternatives.

The Renney Wall Panel is designed for indoor use. While PVC is weather-resistant, the adhesive installation method and panel format are optimised for interior walls. For outdoor cladding, a purpose-rated exterior product is recommended.

Very easy — the PVC surface of the Renney Wall Panel wipes clean with a damp cloth. For marks or residue, a mild household cleaner is sufficient. No sealants, re-grouting, or specialist products are ever needed. Free worldwide shipping, typically 15–21 business days.

Trade program

Design professionals, this one's for you.

Access trade pricing, priority sourcing, and a dedicated account manager. Built for interior designers, architects, and developers procuring at scale.

Apply for trade access →
You may also like
Loading recommendations…
Free worldwide shipping
On every order, no minimum
1-year warranty
Covered against defects
14-day returns
Hassle-free, no questions
Live order tracking
Know exactly where it is