Pendant Light

Kollum Pendant Light Fabric shade, soft warmth overhead

$1,465
Standard price
$1,245.25 Member price · Save 15% Join now →
✦ Free worldwide shipping on all orders
A fabric-shade pendant with a warm, diffused glow — two sizes, adjustable drop, replaceable E27 LED for bedroom or living room.
Size
D19.7"(50cm)
D23.6"(60cm)
Protection plan
1-Year Included
Standard coverage
2-Year +$69
Extended coverage
3-Year +$139
Premium coverage
5-Year +$229
Ultimate coverage
1
Estimated arrival by Aug 11, 2026
Free shipping1-year warranty 14-day returns Order tracking
View spec sheet (PDF)
Specifications
Material
Fabric
Finish
White
Light Source
LED E27 (replaceable, included)
Output
15W (1500lm)
Dimensions
D50cm / D60cm
Weight
3.5kg
Canopy
D18cm
Sloped Ceiling
Compatible
Voltage
90–260VAC
Installation
Hardwired
Dimmable
Upon request
The Object

Shade of fabriclight filtered, not focused

The Kollum hangs a fabric shade from a minimal canopy, letting the textile do the work of softening the E27 LED inside. The glow through fabric is warmer and more diffused than glass — it spreads without directing. Two diameters (50 or 60 cm), sloped-ceiling compatible, height adjustable. A quiet overhead presence that layers into almost any interior.
Why you'll love it
  • Fabric shade — diffused, warm glow without hotspots
  • Two sizes: 50 cm or 60 cm diameter
  • Adjustable cord and sloped-ceiling compatible
  • Replaceable E27 LED included
  • Dimmable on request · wide voltage 90–260V
Details

A standard hardwired ceiling install — most of it is switching off the power and matching three wires. Set your hanging height before you connect anything, and you're most of the way there.

Before you begin

  • Mounting — to a standard ceiling junction box
  • Power — hardwired to your mains supply
  • Dimming — socketed bulbs dim; integrated-LED models don't
  • Drop — arrives at 47" (1.2 m); want it shorter or longer? Just email us before it ships
  • Ceilings — flat, and most sloped (check the product specs)

What you'll need

  • Screwdriver, voltage tester, wire stripper
  • Wire nuts (included), ladder
  • Drill (only for a new junction box or non-standard ceiling)

Step by step

  1. Turn off the power — switch off the lighting circuit at the breaker, then confirm it's dead with a voltage tester.
  2. Mount the bracket — fasten the included bracket to the junction box, snug and level.
  3. Set your height — before wiring, adjust the cord, chain, or downrod to your drop and lock it at the canopy.
  4. Connect the wires — black to black, white to white, green or bare to ground. Secure each with a wire nut and tuck them into the box.
  5. Attach the fixture — line the canopy up with the bracket and fix it flush with the provided screws or caps.
  6. Add the bulbs — correct type and wattage; if dimming, check the bulbs match your wall dimmer.
  7. Power on and test.

Good to know

  • Follow your local electrical codes.
  • For high or angled ceilings, or anything complex, bring in a licensed electrician.
  • Don't over-tighten decorative parts; dust gently with a soft cloth.

Need a custom drop or have a technical question? We're happy to help — email hey@navadecor.co.

Every order is eligible for customization. Frequently requested:

  • Adjusted hanging or suspension length
  • Custom material finish or paint color
  • Modified light emission color or temperature
  • Dimmer integration
  • Scaled dimensions — larger or smaller
  • Complete fixture redesign to your specifications
Standard shipping

Complimentary worldwide shipping to 120+ countries. Delivery within 21 business days from your order date.

Priority processing

Need it sooner? Add Priority Processing at checkout to fast-track manufacturing — approximately 10–20 business days to delivery.

Returns

14 days from receipt to initiate a return. A 20% restocking fee applies to returns or exchanges not due to defect or damage. To start a return, email .

A standard 1-year manufacturer warranty is included. Extend to 2, 3, or 5 years total coverage at checkout.

Protection coverage
  • Manufacturing defects — faults in materials or workmanship
  • Electrical issues — electrical component failures under normal use
  • Finish defects — premature flaking, pitting or discoloration
  • Not covered — accidental or physical damage, moisture and corrosion, normal wear and tear, and light bulbs
Simple claims process
  1. Contact our support team via email.
  2. Provide your order details and a description of the issue.
  3. Receive a decision within 48 hours. If approved, we ship a replacement at no cost to you.
The making

Fabric drawn around the framelight seeps through

The shade is a fabric skin stretched over an internal frame — the weave is tight enough to diffuse the light source but open enough to let warmth pass through. The white exterior reads crisp and clean by day; the interior glows softly once the LED is on.

Innovative engineering · intelligent design
Fabric diffusion

Textile shade spreads the LED into a soft, even glow — no visible bulb, no hotspot below.

Two sizes

50 cm for bedrooms and compact spaces; 60 cm for dining rooms and open-plan areas.

Adjustable drop

Cord adjusts to suit your ceiling height — and it works on sloped ceilings too.

In a few words
Fabric shadeWarm diffusionTwo sizesAdjustable dropDimmable option
Frequently asked

Nava ships worldwide free of charge. Delivery typically takes 15–21 business days from dispatch. Tracking is provided once your order is on its way.

Yes — canopy, cord, and all mounting hardware are included. A ceiling junction box is required; wiring to it should be done by a certified electrician.

The fabric shade diffuses the E27 LED into a broad, even glow rather than a concentrated pool. The warmth seeps through the weave, creating a soft ambient quality that suits bedrooms and relaxed living rooms.

It's designed for ambient use in bedrooms, living rooms, homestays, and hotels rather than bright functional spaces. Hallways and corridors with clearance are fine; kitchens requiring task lighting less so.

The shade is a white fabric skin on an internal frame. The canopy and hardware are metal. The E27 LED bulb included is glass and ceramic — replaceable with any standard E27.

Yes — the clean white form and replaceable E27 bulb make it practical for guest rooms and common areas. The hardwired installation is standard for hotel use.

Fabric softens the light source more than glass — no bright ring or visible filament shows through. The output is even and directionally neutral, which suits ambient layering rather than task lighting.

Nordic minimalist, contemporary, and Japandi interiors. The white fabric and clean form are restrained enough to suit most neutral-toned rooms without competing with other elements.

Standard hardwired pendant installation — mount the canopy to the ceiling junction box, set the cord length, and insert the E27 bulb. A licensed electrician handles the wiring portion.

The 15W E27 LED produces 1500 lumens — enough for ambient lighting in rooms up to approximately 15 sqm. For larger spaces, consider supplementing with additional sources or choosing the 60 cm version.

Trade program

Design professionals, this one's for you.

Access trade pricing, priority sourcing, and a dedicated account manager. Built for interior designers, architects, and developers procuring at scale.

Apply for trade access →
You may also like
Loading recommendations…
Free worldwide shipping
On every order, no minimum
1-year warranty
Covered against defects
14-day returns
Hassle-free, no questions
Live order tracking
Know exactly where it is