Pull Bar

Hadeland Pull Bar Tapered brass bar, rounded ends in hand

$40
Standard price
$34 Member price · Save 15% Join now →
✦ Free worldwide shipping on all orders
A solid brass pull bar with a tapered silhouette and rounded ends — ergonomic grip for kitchen cabinets, bathroom drawers, and entryway doors.
Size
Hole to Hole: L3.7"(9.6cm)
Hole to Hole: L5"(12.8cm)
Hole to Hole: L6.2"(16cm)
Hole to Hole: L7.5"(19.2cm)
Protection plan
1-Year Included
Standard coverage
2-Year +$9
Extended coverage
3-Year +$19
Premium coverage
5-Year +$29
Ultimate coverage
1
Estimated arrival by Aug 13, 2026
Free shipping1-year warranty 14-day returns Order tracking
View spec sheet (PDF)
Specifications
Material
Brass
Finish
Brass
Pull bar lengths
L 13 / 16 / 19.8 / 23.2 cm x H 3.3 cm
Hole spacing
9.6 / 12.8 / 16 / 19.2 cm
Weight
96 / 118 / 165 / 192 g
Grip
Ergonomic
Application
Cabinets, drawers, cupboard, doors
The Object

Tapered bodythe grip narrows toward each end

The Hadeland Pull Bar tapers from a wider centre to rounded ends — the form fits naturally in the hand, fingers curving around the centre without catching on a sharp edge. Solid brass in a standard finish, four lengths, works in kitchens and bathrooms as well as it does in entryways. Built for high-traffic doors where a pull bar gets used dozens of times a day.
Why you'll love it
  • Tapered form narrows to rounded ends — comfortable in every grip
  • Solid brass — weighty, tarnish-resistant, handles high traffic
  • Four lengths: 13, 16, 19.8, and 23.2 cm
  • Suits modern and classic interiors equally
  • Fixings and hardware included
Details

No wiring here — just careful measuring, drilling, and mounting. Mortice locks take a bit more patience than a simple knob.

Before you begin

  • Mounting — surface installation on doors, drawers, or cabinetry; check your product's dimensions for placement and drilling points

What you'll need

  • Screwdriver (Phillips and flathead), drill and drill bits, Allen key
  • Tape measure, pencil, level
  • Chisel (for mortice lock installation)
  • Screws and anchors, safety goggles

Step by step

  1. Cabinet hardware — mark drilling points — use a tape measure and pencil; a template helps for uniformity across multiple pieces.
  2. Cabinet hardware — drill holes — use a bit matched to the screw diameter, keeping the drill straight.
  3. Cabinet hardware — mount — insert screws from inside the cabinet or drawer, secure the hardware on the front face, and tighten without overtightening.
  4. Cabinet hardware — align and inspect — confirm straightness and spacing before fully securing.
  5. Thumb lock or dummy handle — confirm orientation — determine left- or right-hand door swing and adjust as needed.
  6. Thumb lock or dummy handle — mark installation height — typically 36–38 inches from the floor to the handle center; align the mounting plate.
  7. Thumb lock or dummy handle — drill and attach — drill pilot holes and secure the backplate and handle with the included screws. Dummy handles install directly, no latch mechanism.
  8. Thumb lock only — install the strike plate — mark the latch location on the door frame, chisel a recess if needed, and screw the strike plate in.
  9. Mortice lock — cut the mortice pocket — use a chisel and drill to create a cavity in the door edge, following the provided measurements.
  10. Mortice lock — insert the lock body — fit it into the cavity and attach through the faceplate with screws.
  11. Mortice lock — install the handle — align the spindle through the lock, attach handles on both sides, and tighten with a screwdriver or Allen key.
  12. Mortice lock — install the cylinder (if applicable) — insert the key cylinder and secure with the cylinder screw from the door edge.
  13. Mortice lock — mount the strike plate — align with the latch mechanism and secure to the door frame.

Good to know

  • Double-check measurements before drilling.
  • Use a level for consistent alignment across multiple units.
  • If you're unfamiliar with mortice installation, consult a locksmith or professional.
  • Make sure all moving parts operate smoothly before final tightening.
  • Dummy handles are decorative or pull-only — they don't engage latches or locks.

Questions about installation or compatibility? Email hey@navadecor.co.

Every order is eligible for customization. Frequently requested:

  • Adjusted hanging or suspension length
  • Custom material finish or paint color
  • Modified light emission color or temperature
  • Dimmer integration
  • Scaled dimensions — larger or smaller
  • Complete fixture redesign to your specifications
Standard shipping

Complimentary worldwide shipping to 120+ countries. Delivery within 21 business days from your order date.

Priority processing

Need it sooner? Add Priority Processing at checkout to fast-track manufacturing — approximately 10–20 business days to delivery.

Returns

14 days from receipt to initiate a return. A 20% restocking fee applies to returns or exchanges not due to defect or damage. To start a return, email .

A standard 1-year manufacturer warranty is included. Extend to 2, 3, or 5 years total coverage at checkout.

Protection coverage
  • Manufacturing defects — faults in materials or workmanship
  • Electrical issues — electrical component failures under normal use
  • Finish defects — premature flaking, pitting or discoloration
  • Not covered — accidental or physical damage, moisture and corrosion, normal wear and tear, and light bulbs
Simple claims process
  1. Contact our support team via email.
  2. Provide your order details and a description of the issue.
  3. Receive a decision within 48 hours. If approved, we ship a replacement at no cost to you.
On the detail

Rounded endsthe taper closes clean

The taper is subtle — a few millimetres difference between the centre width and the end — but it's enough to feel when you grip it. The rounded ends prevent the sharp corners that snag on passing clothing or skin. Brass work-hardens slightly over years of use, so the finish deepens and the material strengthens rather than softening.

Innovative engineering · intelligent design
What the tapered form delivers.
Ergonomic form

The taper guides the hand naturally to the centre — secure grip with no sharp catch at the ends.

Four lengths

13 to 23.2 cm — choose by hole spacing to match existing cabinetry or start from scratch.

High-traffic ready

Solid brass work-hardens with daily use — the material strengthens rather than wearing thin.

In a few words
Tapered brassRounded endsFour lengthsErgonomic gripKitchen to entrywayTarnish resistant
Frequently asked

Solid brass throughout — body, ends, and internal fixing channels. No hollow sections, no plastic. The brass finish is polished at the factory and develops a natural patina with daily handling over time.

It suits cabinet doors, kitchen drawers, bathroom drawers, cupboard doors, and entryway interior panels. For exterior doors, contact Nava — brass is suitable but finishing requirements may differ in high-humidity or coastal environments.

Yes — standard two-hole mounting with fixings included. Hole spacing per size is listed in the specs above. Confirm the spacing against your cabinetry before ordering if you're replacing existing hardware.

Modern, transitional, and classic interiors equally. The tapered form is neither strictly contemporary nor period-specific — the brass finish anchors it in rooms with timber, stone, or painted cabinetry.

Kitchen cabinets and drawers are the most common application, but it works well in bathrooms, wardrobes, studies, and entryways. The four lengths let you match the pull to the door or drawer size.

Yes — the taper guides the fingers to the wider centre section, and the rounded ends mean there is no sharp edge to catch on. The weight of solid brass (96–192 g) adds a satisfying feel to each use.

Yes — solid brass work-hardens slightly over years of daily use, making it stronger rather than weaker. It's one of the few hardware materials that improves with use. Tarnish resistance is inherent to the alloy.

Brass resists tarnishing in most household environments. Over time the surface develops a patina — a deepening of tone rather than a degradation. In high-humidity spaces (bathrooms), a light wipe-down keeps it looking its best.

Four lengths — 13, 16, 19.8, and 23.2 cm (centre-to-centre hole spacing: 9.6, 12.8, 16, and 19.2 cm). Choose by matching the hole spacing to your existing cabinetry or by the visual proportion you want.

Nava covers all hardware with a 1-year warranty, extendable to 2 or 3 years. 14-day returns from delivery. Free worldwide shipping takes approximately 15–21 business days.

Trade program

Design professionals, this one's for you.

Access trade pricing, priority sourcing, and a dedicated account manager. Built for interior designers, architects, and developers procuring at scale.

Apply for trade access →
You may also like
Loading recommendations…
Free worldwide shipping
On every order, no minimum
1-year warranty
Covered against defects
14-day returns
Hassle-free, no questions
Live order tracking
Know exactly where it is