Pull Bar

Glomma Pull Bar Crackled ceramic, warm brass tone

$30
Standard price
$25.50 Member price · Save 15% Join now →
✦ Free worldwide shipping on all orders
A ceramic-and-alloy cabinet pull with a crackled glaze and curved grip — antique brass detail for traditional and rustic interiors.
Size
A - Hole to Hole: L3.7"(9.6cm)
B - Hole to Hole: L5"(12.8cm)
C - Hole to Hole: L5"(12.8cm)
Protection plan
1-Year Included
Standard coverage
2-Year +$9
Extended coverage
3-Year +$19
Premium coverage
5-Year +$29
Ultimate coverage
1
Estimated arrival by Aug 13, 2026
Free shipping1-year warranty 14-day returns Order tracking
View spec sheet (PDF)
Specifications
Material
Ceramic, Zinc alloy
Finish
White glaze with antique brass tone
Grip style
Ergonomic curved
Application
Cupboard, cabinets, drawers, wardrobes · Dimensions
Knob A
D 3.2 cm
Knob B
D 3.7 cm
Pull Bar A
L 11 cm (hole spacing 9.6 cm)
Pull Bar B
L 14 cm (hole spacing 12.8 cm)
Pull Bar C
L 14.5 cm (hole spacing 12.8 cm)
The Object

Glazed by handcrackled by design

The Glomma Pull Bar sets a crackle-glazed ceramic centre between two zinc alloy mounts. The glaze is deliberately irregular — each piece holds its own pattern of fine surface lines, a quality that cheap pulls never have. The curve fits the hand naturally, and the antique brass tone on the alloy warms a traditional or rustic cabinet door without effort.
Why you'll love it
  • Crackled ceramic centre — each piece uniquely glazed
  • Zinc alloy mounts for lasting structural strength
  • Curved ergonomic grip — comfortable in daily use
  • Antique brass tone complements warm-toned cabinetry
  • Knob and pull bar in two sizes — kitchen to wardrobe
Details

No wiring here — just careful measuring, drilling, and mounting. Mortice locks take a bit more patience than a simple knob.

Before you begin

  • Mounting — surface installation on doors, drawers, or cabinetry; check your product's dimensions for placement and drilling points

What you'll need

  • Screwdriver (Phillips and flathead), drill and drill bits, Allen key
  • Tape measure, pencil, level
  • Chisel (for mortice lock installation)
  • Screws and anchors, safety goggles

Step by step

  1. Cabinet hardware — mark drilling points — use a tape measure and pencil; a template helps for uniformity across multiple pieces.
  2. Cabinet hardware — drill holes — use a bit matched to the screw diameter, keeping the drill straight.
  3. Cabinet hardware — mount — insert screws from inside the cabinet or drawer, secure the hardware on the front face, and tighten without overtightening.
  4. Cabinet hardware — align and inspect — confirm straightness and spacing before fully securing.
  5. Thumb lock or dummy handle — confirm orientation — determine left- or right-hand door swing and adjust as needed.
  6. Thumb lock or dummy handle — mark installation height — typically 36–38 inches from the floor to the handle center; align the mounting plate.
  7. Thumb lock or dummy handle — drill and attach — drill pilot holes and secure the backplate and handle with the included screws. Dummy handles install directly, no latch mechanism.
  8. Thumb lock only — install the strike plate — mark the latch location on the door frame, chisel a recess if needed, and screw the strike plate in.
  9. Mortice lock — cut the mortice pocket — use a chisel and drill to create a cavity in the door edge, following the provided measurements.
  10. Mortice lock — insert the lock body — fit it into the cavity and attach through the faceplate with screws.
  11. Mortice lock — install the handle — align the spindle through the lock, attach handles on both sides, and tighten with a screwdriver or Allen key.
  12. Mortice lock — install the cylinder (if applicable) — insert the key cylinder and secure with the cylinder screw from the door edge.
  13. Mortice lock — mount the strike plate — align with the latch mechanism and secure to the door frame.

Good to know

  • Double-check measurements before drilling.
  • Use a level for consistent alignment across multiple units.
  • If you're unfamiliar with mortice installation, consult a locksmith or professional.
  • Make sure all moving parts operate smoothly before final tightening.
  • Dummy handles are decorative or pull-only — they don't engage latches or locks.

Questions about installation or compatibility? Email hey@navadecor.co.

Every order is eligible for customization. Frequently requested:

  • Adjusted hanging or suspension length
  • Custom material finish or paint color
  • Modified light emission color or temperature
  • Dimmer integration
  • Scaled dimensions — larger or smaller
  • Complete fixture redesign to your specifications
Standard shipping

Complimentary worldwide shipping to 120+ countries. Delivery within 21 business days from your order date.

Priority processing

Need it sooner? Add Priority Processing at checkout to fast-track manufacturing — approximately 10–20 business days to delivery.

Returns

14 days from receipt to initiate a return. A 20% restocking fee applies to returns or exchanges not due to defect or damage. To start a return, email .

A standard 1-year manufacturer warranty is included. Extend to 2, 3, or 5 years total coverage at checkout.

Protection coverage
  • Manufacturing defects — faults in materials or workmanship
  • Electrical issues — electrical component failures under normal use
  • Finish defects — premature flaking, pitting or discoloration
  • Not covered — accidental or physical damage, moisture and corrosion, normal wear and tear, and light bulbs
Simple claims process
  1. Contact our support team via email.
  2. Provide your order details and a description of the issue.
  3. Receive a decision within 48 hours. If approved, we ship a replacement at no cost to you.
The finish

Crackle glazefine lines fired into the surface

The crackled effect is produced during the firing process — glaze and ceramic cool at different rates, creating a network of fine lines that are sealed beneath the surface. The pattern varies across each piece, so a row of pulls on a cabinet front will share the same tone but carry individual character. The zinc alloy ends are plated in antique brass and sealed to resist wear.

Innovative engineering · intelligent design
What the two materials each contribute.
Unique glaze

Crackled ceramic surface varies piece to piece — no two pulls are exactly identical.

Built to last

Zinc alloy mounts are strong enough for wardrobe doors and kitchen drawers in daily use.

Traditional warmth

Antique brass tone suits rustic, heritage, and warm-neutral cabinetry without effort.

In a few words
Crackle-glazed ceramicZinc alloy mountsAntique brass toneKnob and pull barTraditional or rustic
Frequently asked

A crackle-glazed ceramic centre piece held between two zinc alloy mounts with an antique brass finish. The ceramic provides the decorative texture; the alloy provides structural strength.

Kitchen cabinets, bathroom vanities, wardrobe doors, and chest drawers — any furniture with standard hole spacing. Available in three pull bar lengths and two knob sizes to suit different furniture.

The crackled glaze — a fired pattern of fine surface lines that develops differently on every piece. It gives the pull a handmade quality that machined metal handles don't replicate.

It's best suited to traditional, rustic, and heritage interiors. In a contemporary kitchen with warm-toned cabinetry it can work as a contrast detail, but it's most at home with classic styles.

Yes — the zinc alloy mounts are robust for daily use on cabinet and wardrobe doors. The ceramic glaze is sealed and scratch-resistant under normal handling.

White crackled ceramic with antique brass-toned alloy mounts — one finish. The combination is designed to complement cream, off-white, and warm-wood cabinetry.

Yes — mounting screws are included for standard hole spacings. Check your cabinet's existing hole spacing against the pull bar sizes before ordering.

Yes — the ceramic glaze and alloy finish both perform well in kitchen environments. Avoid prolonged soaking or immersion but normal splashes and cleaning are fine.

Two knob sizes (D 3.2 cm and D 3.7 cm) and three pull bar lengths (11 cm, 14 cm, 14.5 cm) with hole spacings of 9.6 cm and 12.8 cm. Mix knobs and pulls on the same cabinet for a layered look.

Wipe with a damp cloth and dry immediately. Avoid abrasive cleaners or harsh chemicals on the ceramic or alloy finish — they can dull the crackle glaze over time.

Trade program

Design professionals, this one's for you.

Access trade pricing, priority sourcing, and a dedicated account manager. Built for interior designers, architects, and developers procuring at scale.

Apply for trade access →
You may also like
Loading recommendations…
Free worldwide shipping
On every order, no minimum
1-year warranty
Covered against defects
14-day returns
Hassle-free, no questions
Live order tracking
Know exactly where it is