Knob

Fraugde Knob Solid brass, ridged and squared

$50
Standard price
$42.50 Member price · Save 15% Join now →
✦ Free worldwide shipping on all orders
A square brass cabinet knob with a ridged surface — firm grip, bold geometry, in black, brass, and silver, two sizes.
Size
A: Knob: 1.4"(3.6cm) x 0.5"(1.5cm)
B: Knob: 1.8"(4.8cm) x 0.8"(2.2cm)
Color
Black
Brass
Silver
Protection plan
1-Year Included
Standard coverage
2-Year +$9
Extended coverage
3-Year +$19
Premium coverage
5-Year +$29
Ultimate coverage
1
Estimated arrival by Aug 11, 2026
Free shipping1-year warranty 14-day returns Order tracking
View spec sheet (PDF)
Specifications
Material
Brass
Finish
Black / Brass / Silver
Sizes
D3.6 x H1.5 cm / B — D4.8 x H2.2 cm
Weight
88 g (A) / 140 g (B)
Grip
Ergonomic ridged
Application
Cupboards, cabinets, drawers, wardrobes
The Object

Ridged surfacesolid brass behind every turn

The Fraugde Knob is solid brass worked into a square form with a ridged pattern across the face — the ridges are tactile and functional, giving a confident grip even with one finger. It's a piece that reads as deliberate: the square shape sits flush with the drawer face, the ridges catch the light, and the weight of solid brass is immediately clear when you reach for it. Two sizes, three finishes.
Why you'll love it
  • Solid brass — weighty, warm, and built for decades of daily use
  • Ridged pattern adds grip and catches light across the surface
  • Square form — sits flush and deliberate on any drawer face
  • Three finishes: brass, black, and silver
  • Two sizes — 3.6 cm and 4.8 cm diameter
Details

Includes the solid-brass plate, toggle mechanism, and mounting hardware. A straightforward swap for an existing switch — power off, match the wires, screw the plate back on.

Step by step

  1. Turn off the power at your breaker or fuse box.
  2. Remove the old cover plate — unscrew it and set it aside.
  3. Take out the old switch — unscrew it from the box and ease it out to reach the wiring.
  4. Disconnect the wires — loosen the screws, or if back-inserted, cut and strip the ends.
  5. Wire the new toggle — live to the brass/black screw, neutral to silver (if your switch uses one), ground to the green screw. Tighten each.
  6. Secure the switch — tuck the wires back, align the toggle, fasten with the included screws.
  7. Fit the brass plate over the switch and screw it in.
  8. Power back on at the panel.
  9. Test — toggle up and down; the light or device should switch cleanly.

Unsure at any point? Call in a licensed electrician — safety comes first. Questions? Email hey@navadecor.co.

Every order is eligible for customization. Frequently requested:

  • Adjusted hanging or suspension length
  • Custom material finish or paint color
  • Modified light emission color or temperature
  • Dimmer integration
  • Scaled dimensions — larger or smaller
  • Complete fixture redesign to your specifications
Standard shipping

Complimentary worldwide shipping to 120+ countries. Delivery within 21 business days from your order date.

Priority processing

Need it sooner? Add Priority Processing at checkout to fast-track manufacturing — approximately 10–20 business days to delivery.

Returns

14 days from receipt to initiate a return. A 20% restocking fee applies to returns or exchanges not due to defect or damage. To start a return, email .

A standard 1-year manufacturer warranty is included. Extend to 2, 3, or 5 years total coverage at checkout.

Protection coverage
  • Manufacturing defects — faults in materials or workmanship
  • Electrical issues — electrical component failures under normal use
  • Finish defects — premature flaking, pitting or discoloration
  • Not covered — accidental or physical damage, moisture and corrosion, normal wear and tear, and light bulbs
Simple claims process
  1. Contact our support team via email.
  2. Provide your order details and a description of the issue.
  3. Receive a decision within 48 hours. If approved, we ship a replacement at no cost to you.
Cut and finished

Ridges pressed ingrip built into the form

The ridged pattern is machined into the brass face, not applied as a surface texture — so it holds its depth and sharpness as the knob ages. Brass develops a patina with use; the black and silver finishes hold their tone. Each knob is ergonomically shaped so the square sits comfortably in a pinch grip.

Innovative engineering · intelligent design
What solid brass and machined detail mean over time.
Solid brass

No plating over cheaper metal — full brass through, warm in the hand from day one.

Ridged grip

Machined ridges hold a secure grip even with wet or busy hands.

Three finishes

Brass, black, or silver — each one a different read on the same geometric form.

In a few words
SolidRidgedSquareTactileBrass
Frequently asked

Solid brass — not plated or hollow. The full weight of the knob is brass, which gives it a noticeably substantial feel and means it develops a patina rather than wearing through a surface finish.

Cabinets, kitchen drawers, bathroom vanities, wardrobes, and any furniture with a standard knob fitting. The square form and ridged face suit both modern and classic joinery.

Yes — the machined ridges run across the face of the knob, giving real traction for a pinch grip. The texture is functional, not just decorative.

The smaller A knob (3.6 cm) weighs 88 g and the larger B knob (4.8 cm) weighs 140 g. Both feel solid and well-made in hand — noticeably heavier than typical pressed-steel knobs.

Solid brass is naturally corrosion-resistant in dry indoor environments. The black and silver finishes are treated for durability. In high-humidity spaces like bathrooms, wipe dry after cleaning.

Yes — the square geometry and ridged face read as contemporary, but the solid brass material and proportions are timeless. It works well in Japandi, industrial, and warm traditional kitchens and bathrooms.

Yes — single screw through the drawer face, standard fitting. Confirm your existing hole diameter and thread size match a standard knob fitting before ordering.

Yes — solid brass handles moisture well. Avoid leaving pools of water on the surface. The black finish may need occasional re-oiling in very humid bathrooms to maintain its tone.

No — wipe with a dry cloth. Brass will develop a natural patina over time, which many consider part of its character. If you prefer the original tone, a brass polish restores it.

Solid brass through — not plated. The ridged face is machined rather than moulded, giving crisp edges that hold their depth. The square form is uncommon in knobs; most are round. It reads as a considered detail.

Trade program

Design professionals, this one's for you.

Access trade pricing, priority sourcing, and a dedicated account manager. Built for interior designers, architects, and developers procuring at scale.

Apply for trade access →
You may also like
Loading recommendations…
Free worldwide shipping
On every order, no minimum
1-year warranty
Covered against defects
14-day returns
Hassle-free, no questions
Live order tracking
Know exactly where it is