Pendant Light

Fovling Pendant Light Alabaster bar, island-length glow

$2,590
Standard price
$2,201.50 Member price · Save 15% Join now →
✦ Free worldwide shipping on all orders
A 120 cm linear pendant with an alabaster shade — warm, diffused light along a dining table or kitchen island, on a black iron frame.
Size
L47.2"(120cm) x H19.6"(50cm) / 30W
Emitting Color
Warm White (3000K)
Protection plan
1-Year Included
Standard coverage
2-Year +$139
Extended coverage
3-Year +$279
Premium coverage
5-Year +$459
Ultimate coverage
1
Estimated arrival by Aug 11, 2026
Free shipping1-year warranty 14-day returns Order tracking
View spec sheet (PDF)
Specifications
Material
Alabaster, Iron
Finish
Black
Light source
Integrated LED, 30W (3300 lm)
Dimensions
L120 x H50 cm
Canopy
D10 cm
Cord
Adjustable to 50 cm
Sloped ceiling
On request
Voltage
90–260V
Installation
Hardwired (pipe-erect)
Dimmable
On request
The Object

Stretched across the tablestone holds the glow

The Fovling Pendant runs 120 cm of alabaster across a black iron frame, casting a long, even wash of warm light below. Alabaster doesn't reflect — it glows from within, each shade carrying its own natural veining. The integrated LED sits behind the stone, so the output is soft and settled rather than sharp. Pipe-erect mount, adjustable cord to 50 cm.
Why you'll love it
  • Alabaster shade — glows from within, not off a reflector
  • 120 cm linear form — covers a full dining table or island
  • Each shade uniquely veined — no two pieces identical
  • Black iron frame — clean contrast against the warm stone
  • Integrated LED, dimmable on request
Details

A standard hardwired ceiling install — most of it is switching off the power and matching three wires. Set your hanging height before you connect anything, and you're most of the way there.

Before you begin

  • Mounting — to a standard ceiling junction box
  • Power — hardwired to your mains supply
  • Dimming — socketed bulbs dim; integrated-LED models don't
  • Drop — arrives at 47" (1.2 m); want it shorter or longer? Just email us before it ships
  • Ceilings — flat, and most sloped (check the product specs)

What you'll need

  • Screwdriver, voltage tester, wire stripper
  • Wire nuts (included), ladder
  • Drill (only for a new junction box or non-standard ceiling)

Step by step

  1. Turn off the power — switch off the lighting circuit at the breaker, then confirm it's dead with a voltage tester.
  2. Mount the bracket — fasten the included bracket to the junction box, snug and level.
  3. Set your height — before wiring, adjust the cord, chain, or downrod to your drop and lock it at the canopy.
  4. Connect the wires — black to black, white to white, green or bare to ground. Secure each with a wire nut and tuck them into the box.
  5. Attach the fixture — line the canopy up with the bracket and fix it flush with the provided screws or caps.
  6. Add the bulbs — correct type and wattage; if dimming, check the bulbs match your wall dimmer.
  7. Power on and test.

Good to know

  • Follow your local electrical codes.
  • For high or angled ceilings, or anything complex, bring in a licensed electrician.
  • Don't over-tighten decorative parts; dust gently with a soft cloth.

Need a custom drop or have a technical question? We're happy to help — email hey@navadecor.co.

Every order is eligible for customization. Frequently requested:

  • Adjusted hanging or suspension length
  • Custom material finish or paint color
  • Modified light emission color or temperature
  • Dimmer integration
  • Scaled dimensions — larger or smaller
  • Complete fixture redesign to your specifications
Standard shipping

Complimentary worldwide shipping to 120+ countries. Delivery within 21 business days from your order date.

Priority processing

Need it sooner? Add Priority Processing at checkout to fast-track manufacturing — approximately 10–20 business days to delivery.

Returns

14 days from receipt to initiate a return. A 20% restocking fee applies to returns or exchanges not due to defect or damage. To start a return, email .

A standard 1-year manufacturer warranty is included. Extend to 2, 3, or 5 years total coverage at checkout.

Protection coverage
  • Manufacturing defects — faults in materials or workmanship
  • Electrical issues — electrical component failures under normal use
  • Finish defects — premature flaking, pitting or discoloration
  • Not covered — accidental or physical damage, moisture and corrosion, normal wear and tear, and light bulbs
Simple claims process
  1. Contact our support team via email.
  2. Provide your order details and a description of the issue.
  3. Receive a decision within 48 hours. If approved, we ship a replacement at no cost to you.
On the stone

Veined, translucentlit from the inside out

Alabaster is the reason this pendant works. The mineral is translucent enough to carry light through the body of the stone — every natural vein becomes visible once lit. Paired with a black iron frame at 120 cm, the Fovling anchors a dining table without competing with it.

Innovative engineering · intelligent design
One long shade, one continuous glow.
Stone glow

Alabaster diffuses the LED into a soft, warm wash — no visible source, no harsh spots.

Island length

120 cm covers a full counter or dining table with even, balanced light.

Unique veining

Natural alabaster means every fixture carries its own pattern — no two alike.

In a few words
Alabaster glow120 cm wideBlack frameDimmableIsland light
Frequently asked

Alabaster shade on a black iron frame. The alabaster is a natural mineral — translucent enough to let light glow through rather than reflect off it.

Soft, warm, diffused light. The alabaster shade spreads the integrated LED output evenly, with no visible source — a calm, even wash below the fixture.

Yes — the cord adjusts to 50 cm. For installations requiring a longer drop, contact us before ordering and we can configure accordingly.

Best suited for dining tables, kitchen islands, and long counters where balanced, even light across a 120 cm span is needed. Also works in wide hallways or open-plan living areas.

Pipe-erect hardwired installation to a ceiling junction box. All mounting hardware is included. Professional installation by a certified electrician is recommended.

Yes — alabaster is a natural material. Each shade carries its own veining pattern. No two fixtures are identical, and the veining becomes fully visible once the light is on.

The Fovling uses an integrated LED — no separate bulb is needed. The LED is built into the fixture and cannot be swapped independently.

Dimming is available on request. Let us know at checkout and we will configure the fixture to work with a compatible wall dimmer.

120 cm long by 50 cm high, with a 10 cm canopy. It hangs on an adjustable cord to 50 cm and is suitable for most standard ceiling heights above a dining table.

Yes — the black iron frame and natural alabaster work in modern, minimalist, and Scandinavian-influenced interiors. The form is clean; the material adds warmth.

Trade program

Design professionals, this one's for you.

Access trade pricing, priority sourcing, and a dedicated account manager. Built for interior designers, architects, and developers procuring at scale.

Apply for trade access →
You may also like
Loading recommendations…
Free worldwide shipping
On every order, no minimum
1-year warranty
Covered against defects
14-day returns
Hassle-free, no questions
Live order tracking
Know exactly where it is