Pendant Light

Chiem Pendant Light Raw travertine, one warm bulb

$240
Standard price
$204 Member price · Save 15% Join now →
✦ Free worldwide shipping on all orders
A compact travertine pendant — the stone softens a single warm bulb into an earthy, organic glow over a table or island.
Size
D4.7"(12cm) x H6.3"(16cm) / 7W
Protection plan
1-Year Included
Standard coverage
2-Year +$19
Extended coverage
3-Year +$39
Premium coverage
5-Year +$69
Ultimate coverage
1
Estimated arrival by Aug 11, 2026
Free shipping1-year warranty 14-day returns Order tracking
View spec sheet (PDF)
Dimensions & configurations
Specifications
Material
Travertine
Finish
Beige
Light source
LED E27 (replaceable, included), 10W (1000 lm)
Dimensions
D12 x H16 cm
Cord
Up to 1.8 m, adjustable
Canopy
D10 cm
Sloped ceiling
Compatible
Voltage
90–260V
Installation
Hardwired
Dimmable
On request
The Object

Stone overheadwarm underneath

The Chiem Pendant Light hangs a small travertine cylinder from a slim cord — the stone is the shade, diffusing the single bulb into a soft, earthy warmth below. Travertine's natural pits and grain show through the light; no two hang quite the same. Adjustable cord to 1.8 m, sloped-ceiling compatible, replaceable E27 LED included.
Why you'll love it
  • Travertine stone shade — warm, organic light through natural stone
  • Each piece uniquely grained — no two pendants look alike
  • Compact form — 12 cm wide, 16 cm tall — precise and uncluttered
  • Adjustable cord to 1.8 m · sloped-ceiling compatible
  • Replaceable E27 LED included · dimmable on request
Details

A standard hardwired ceiling install — most of it is switching off the power and matching three wires. Set your hanging height before you connect anything, and you're most of the way there.

Before you begin

  • Mounting — to a standard ceiling junction box
  • Power — hardwired to your mains supply
  • Dimming — socketed bulbs dim; integrated-LED models don't
  • Drop — arrives at 47" (1.2 m); want it shorter or longer? Just email us before it ships
  • Ceilings — flat, and most sloped (check the product specs)

What you'll need

  • Screwdriver, voltage tester, wire stripper
  • Wire nuts (included), ladder
  • Drill (only for a new junction box or non-standard ceiling)

Step by step

  1. Turn off the power — switch off the lighting circuit at the breaker, then confirm it's dead with a voltage tester.
  2. Mount the bracket — fasten the included bracket to the junction box, snug and level.
  3. Set your height — before wiring, adjust the cord, chain, or downrod to your drop and lock it at the canopy.
  4. Connect the wires — black to black, white to white, green or bare to ground. Secure each with a wire nut and tuck them into the box.
  5. Attach the fixture — line the canopy up with the bracket and fix it flush with the provided screws or caps.
  6. Add the bulbs — correct type and wattage; if dimming, check the bulbs match your wall dimmer.
  7. Power on and test.

Good to know

  • Follow your local electrical codes.
  • For high or angled ceilings, or anything complex, bring in a licensed electrician.
  • Don't over-tighten decorative parts; dust gently with a soft cloth.

Need a custom drop or have a technical question? We're happy to help — email hey@navadecor.co.

Every order is eligible for customization. Frequently requested:

  • Adjusted hanging or suspension length
  • Custom material finish or paint color
  • Modified light emission color or temperature
  • Dimmer integration
  • Scaled dimensions — larger or smaller
  • Complete fixture redesign to your specifications
Standard shipping

Complimentary worldwide shipping to 120+ countries. Delivery within 21 business days from your order date.

Priority processing

Need it sooner? Add Priority Processing at checkout to fast-track manufacturing — approximately 10–20 business days to delivery.

Returns

14 days from receipt to initiate a return. A 20% restocking fee applies to returns or exchanges not due to defect or damage. To start a return, email .

A standard 1-year manufacturer warranty is included. Extend to 2, 3, or 5 years total coverage at checkout.

Protection coverage
  • Manufacturing defects — faults in materials or workmanship
  • Electrical issues — electrical component failures under normal use
  • Finish defects — premature flaking, pitting or discoloration
  • Not covered — accidental or physical damage, moisture and corrosion, normal wear and tear, and light bulbs
Simple claims process
  1. Contact our support team via email.
  2. Provide your order details and a description of the issue.
  3. Receive a decision within 48 hours. If approved, we ship a replacement at no cost to you.
On the material

Travertineancient stone, warm light

Travertine is a limestone deposited by mineral springs, and its characteristic surface — small pits, crosscut veins, tonal variation — is preserved here rather than smoothed away. Lit from within the cylinder, those imperfections scatter the light, giving the glow a warmth that polished stone cannot match. Wabi-Sabi in the truest sense: the flaw is the feature.

Innovative engineering · intelligent design
Simple form, unmistakable material.
Stone warmth

Light passes through travertine's natural grain, producing a soft, amber-toned glow below.

Unique piece

Every stone carries its own pitting and tone — your pendant is one of its kind.

Adjustable drop

Cord adjusts to 1.8 m, sloped-ceiling compatible — works over dining tables and kitchen islands.

In a few words
Stone shadeWarm glowUnique grainAdjustable cordSloped ceilingOne bulb
Frequently asked

It's carved from natural travertine — a stone known for its surface pitting and tonal variation. No two pieces are identical, and those natural imperfections become part of the glow when the bulb is on.

Over a dining table, kitchen island, or entryway it works beautifully. The compact 12 cm width suits smaller spaces — a single pendant over a side table or two over a bench both read well.

Yes — a replaceable E27 LED is included. When it eventually needs replacing, any standard E27 bulb works; we recommend a warm colour temperature, around 2700K, to complement the stone.

Wide-range 90–260V — compatible with standard household wiring worldwide without a transformer or adapter.

The included 10W LED produces 1000 lm — enough for focused ambient light over a table or island. The stone shade softens the output, so it's atmospheric rather than task-bright.

One bulb, E27 base — a common fitting found in most hardware stores worldwide. The included LED is 10W warm white; you can swap it for a different warmth or output.

The shade is natural travertine stone. The cord, canopy, and hardware are metal. No synthetic materials in the shade itself — the stone is cut and finished rather than moulded.

Yes — the raw stone and minimal form sit well in modern, Wabi-Sabi, earthy, and transitional interiors. The beige tone pairs with warm neutrals, dark woods, and both light and dark walls.

Very. The travertine shade can be wiped with a dry or barely damp cloth — avoid acidic cleaners, which can etch stone. The E27 bulb is straightforward to swap when needed.

Free worldwide shipping, arriving in approximately 15–21 business days. One-year warranty is standard, extendable to two or three years on request. Returns accepted within 14 days.

Trade program

Design professionals, this one's for you.

Access trade pricing, priority sourcing, and a dedicated account manager. Built for interior designers, architects, and developers procuring at scale.

Apply for trade access →
You may also like
Loading recommendations…
Free worldwide shipping
On every order, no minimum
1-year warranty
Covered against defects
14-day returns
Hassle-free, no questions
Live order tracking
Know exactly where it is