Wall Lamp

Baiersbronn Wall Lamp Aluminium bar, up and down light

$285
Standard price
$242.25 Member price · Save 15% Join now →
✦ Free worldwide shipping on all orders
A slim aluminium wall light that throws light up and down — a clean vertical line for the facade.
Size
L4.3"(11cm) x H8.8"(22.5cm) / 8W
L4.7"(12cm) x H16.7"(42.5cm) / 12W
Emitting Color
Warm White (3000K)
Neutral White (4000K)
Cool White (6000K)
Protection plan
1-Year Included
Standard coverage
2-Year +$19
Extended coverage
3-Year +$39
Premium coverage
5-Year +$69
Ultimate coverage
1
Estimated arrival by Aug 10, 2026
Free shipping1-year warranty 14-day returns Order tracking
View spec sheet (PDF)
Dimensions & configurations
Specifications
Material
Aluminium
Finish
Black
Light source
Integrated LED
Output
8W (880 lm) / 12W (1320 lm)
Sizes
L 11 x H 22.5 cm / L 12 x H 42.5 cm
Weight
1.4 kg / 2 kg
Colour temperature
3000K / 4000K / 6000K
Voltage
90–260V
Installation
Wall mount, hardwired
Dimmable
On request
Backplate
L 11 x H 18 cm / L 12 x H 18 cm
The Object

A vertical markfor the wall

The Baiersbronn runs a slim aluminium body up the wall, sealed against rain, wind, and shifting cold. Light leaves in two directions — climbing the surface above, washing gently below. By dusk it reads as one deliberate stroke against the exterior, less a fixture than part of the architecture.
Why you'll love it
  • Up-and-down light — climbs the wall, pools softly below
  • Weather-sealed aluminium — holds up to rain, wind, cold
  • Clean vertical line — reads as architecture, not ornament
  • Integrated LED — no exposed bulb, no glare
  • Two sizes, in black, indoors or out
Details

Most wall lamps are a simple bracket-and-wire job — but check your power type first, since hardwired, plug-in, and rechargeable models each install a little differently.

Before you begin

  • Dimming — most socketed lamps dim; integrated-LED models don't
  • Power — hardwired, plug-in, or rechargeable depending on the model; check your product details
  • Mounting — wall-mount, hardware included
  • Indoor/outdoor — confirm your model is rated for outdoor use before installing outside

What you'll need

  • Screwdriver
  • Wire nuts (included for hardwired models)
  • Voltage tester
  • Power drill (for new mounting locations)

Step by step

  1. Identify your power type — hardwired, plug-in, or rechargeable. Follow the steps below for yours.
  2. If hardwired: turn off the power — switch off at your main electrical panel and confirm with a voltage tester.
  3. If hardwired: remove the old lamp — unscrew it and disconnect the wires by removing the wire nuts.
  4. If hardwired: attach the new mounting bracket — align it with your junction box or marked wall location and secure with the included screws.
  5. If hardwired: connect the wires — black to black, white to white, green or bare to ground. Twist and secure with wire nuts, then tuck neatly into the junction box.
  6. If hardwired: mount the fixture — align with the bracket and secure with the provided screws.
  7. If hardwired: install the bulb — correct type and wattage, if your model uses one.
  8. If hardwired: restore power and test.
  9. If plug-in: mount the bracket — with anchors or screws, then attach the fixture and plug it into a nearby outlet. Route the cord neatly.
  10. If rechargeable: mount the bracket — with screws and anchors, fully charge the lamp with the included cable, then install it onto the bracket and power on.

Good to know

  • Follow your local electrical codes.
  • Bring in a licensed electrician if you're unsure.
  • Dust and clean your fixture regularly to keep it looking its best.

Need help with installation or have a product question? Email hey@navadecor.co.

Every order is eligible for customization. Frequently requested:

  • Adjusted hanging or suspension length
  • Custom material finish or paint color
  • Modified light emission color or temperature
  • Dimmer integration
  • Scaled dimensions — larger or smaller
  • Complete fixture redesign to your specifications
Standard shipping

Complimentary worldwide shipping to 120+ countries. Delivery within 21 business days from your order date.

Priority processing

Need it sooner? Add Priority Processing at checkout to fast-track manufacturing — approximately 10–20 business days to delivery.

Returns

14 days from receipt to initiate a return. A 20% restocking fee applies to returns or exchanges not due to defect or damage. To start a return, email .

A standard 1-year manufacturer warranty is included. Extend to 2, 3, or 5 years total coverage at checkout.

Protection coverage
  • Manufacturing defects — faults in materials or workmanship
  • Electrical issues — electrical component failures under normal use
  • Finish defects — premature flaking, pitting or discoloration
  • Not covered — accidental or physical damage, moisture and corrosion, normal wear and tear, and light bulbs
Simple claims process
  1. Contact our support team via email.
  2. Provide your order details and a description of the issue.
  3. Receive a decision within 48 hours. If approved, we ship a replacement at no cost to you.
On the build

Sealed bodybuilt for the weather

The body is cast in weather-grade aluminium and finished in black to hold its tone through changing seasons. There is no exposed bulb — the integrated LED sits behind the form, so the light reads as a wash rather than a point. Rain, heat, and cold pass over it without dulling the line.

Innovative engineering · intelligent design
Three reasons it earns its place on the wall.
Two beams

Light leaves up and down, so the wall gains depth and the facade feels taller.

Weather sealed

Aluminium body shields the structure from rain, wind, and shifting temperatures.

Hidden source

Integrated LED with no exposed bulb — a soft halo on the wall instead of harsh glare.

Design statement

A strong markfor the facade

The Baiersbronn mounts to the wall like a deliberate stroke. Even unlit, it gives the exterior a sense of order. At dusk the light rises and falls in two clean beams — climbing into the night, washing down the wall — so the house feels considered from the street.

In your space
At home with · Entryway

Flanking the front door

Two vertical beams frame the entrance, warm and steady as you step through.

At home with · Patio

Where evenings run late

Soft up-and-down light over cushions and stone, made for lingering outside.

At home with · Exterior wall

Glowing through the rain

A steady line of light down weathered stone, built to hold its own outdoors.

What you'll notice
01

Light that shapes the surface, not glare

02

Built to hold up through the seasons

03

Atmosphere without overthinking placement

04

A clean line, even before it's lit

In a few words
Aluminium bodyUp + down lightWeather sealedIntegrated LEDTwo sizesBlack finishIndoor or out
Frequently asked

The Baiersbronn is built from weather-grade aluminium, finished in black. It holds up to rain, wind, and shifting temperatures outdoors, and keeps its tone over the years.

It uses an integrated LED — the source is built into the fixture, so there's no bulb to buy or fit, and nothing exposed to glare. It arrives ready to wire in.

Yes. It's sealed for outdoor use and built to take rain, wind, and damp, so it suits exposed entryways, patios, and garden walls without trouble.

It can be made dimmable on request when you order. Let us know the setting you're after and we'll configure it before it ships.

It's made for entryways, patios, facades, and balconies, and its clean line works indoors too — flanking a door at eye level for balanced up-and-down light.

It's a hardwired fixture, so for a safe, clean connection we recommend a licensed electrician — especially outdoors. The mounting hardware is included.

It runs on a wide 90–260V range, so it works with standard household electrical in most countries without a converter.

It comes in one finish — black — chosen to sit quietly against a wall and hold its tone through sun and rain. It's offered in two sizes.

Its slim vertical line suits contemporary and pared-back exteriors, reading as part of the architecture rather than an attached fixture, indoors or out.

Wipe the aluminium with a soft, damp cloth now and then, then dry it. Avoid abrasive cleaners so the finish stays even and the line stays sharp.

Trade program

Design professionals, this one's for you.

Access trade pricing, priority sourcing, and a dedicated account manager. Built for interior designers, architects, and developers procuring at scale.

Apply for trade access →
You may also like
Loading recommendations…
Free worldwide shipping
On every order, no minimum
1-year warranty
Covered against defects
14-day returns
Hassle-free, no questions
Live order tracking
Know exactly where it is