Wall Lamp

Alcove Wall Lamp Three apertures, one slim outdoor profile

$180
Standard price
$153 Member price · Save 15% Join now →
✦ Free worldwide shipping on all orders
Three LED apertures across a compact aluminium plate — IP54-rated, sealed for continuous outdoor exposure in matte black.
Size
L6.5"(16.5cm) x H2.4"(6cm)
Emitting Color
Warm White (3000K)
Wattage
8W
Protection plan
1-Year Included
Standard coverage
2-Year +$19
Extended coverage
3-Year +$39
Premium coverage
5-Year +$69
Ultimate coverage
1
Estimated arrival by Aug 11, 2026
Free shipping1-year warranty 14-day returns Order tracking
View spec sheet (PDF)
Specifications
Dimensions
L16.5 cm x H6 cm
Material
Aluminium
Finish
Black
Light source
Integrated LED, 8W
Dimmable
On request
Voltage
90–260V
Rating
IP54
Install
Wall mount, hardwired
The Object

Three openingsheld flat against the wall

The Alcove runs three LED apertures across a single low-profile aluminium plate, each casting a band of light onto the wall or ground. The form is spare — nothing projects beyond the plate itself. IP54 sealing protects the electrical components from rain and dust, and the matte black powder coat bonds to the aluminium rather than sitting on top, holding its tone through repeated temperature cycles outdoors.
Why you'll love it
  • IP54 rated — protected against rain and dust for all-weather outdoor use
  • Three-aperture design — wider wall coverage from a compact body
  • Integrated LED, 50,000-hour life — nothing to replace outdoors
  • Die-cast aluminium — denser than sheet metal, resists warping
  • Matte black powder coat — holds colour and resists rust long-term
Details

Most wall lamps are a simple bracket-and-wire job — but check your power type first, since hardwired, plug-in, and rechargeable models each install a little differently.

Before you begin

  • Dimming — most socketed lamps dim; integrated-LED models don't
  • Power — hardwired, plug-in, or rechargeable depending on the model; check your product details
  • Mounting — wall-mount, hardware included
  • Indoor/outdoor — confirm your model is rated for outdoor use before installing outside

What you'll need

  • Screwdriver
  • Wire nuts (included for hardwired models)
  • Voltage tester
  • Power drill (for new mounting locations)

Step by step

  1. Identify your power type — hardwired, plug-in, or rechargeable. Follow the steps below for yours.
  2. If hardwired: turn off the power — switch off at your main electrical panel and confirm with a voltage tester.
  3. If hardwired: remove the old lamp — unscrew it and disconnect the wires by removing the wire nuts.
  4. If hardwired: attach the new mounting bracket — align it with your junction box or marked wall location and secure with the included screws.
  5. If hardwired: connect the wires — black to black, white to white, green or bare to ground. Twist and secure with wire nuts, then tuck neatly into the junction box.
  6. If hardwired: mount the fixture — align with the bracket and secure with the provided screws.
  7. If hardwired: install the bulb — correct type and wattage, if your model uses one.
  8. If hardwired: restore power and test.
  9. If plug-in: mount the bracket — with anchors or screws, then attach the fixture and plug it into a nearby outlet. Route the cord neatly.
  10. If rechargeable: mount the bracket — with screws and anchors, fully charge the lamp with the included cable, then install it onto the bracket and power on.

Good to know

  • Follow your local electrical codes.
  • Bring in a licensed electrician if you're unsure.
  • Dust and clean your fixture regularly to keep it looking its best.

Need help with installation or have a product question? Email hey@navadecor.co.

Every order is eligible for customization. Frequently requested:

  • Adjusted hanging or suspension length
  • Custom material finish or paint color
  • Modified light emission color or temperature
  • Dimmer integration
  • Scaled dimensions — larger or smaller
  • Complete fixture redesign to your specifications
Standard shipping

Complimentary worldwide shipping to 120+ countries. Delivery within 21 business days from your order date.

Priority processing

Need it sooner? Add Priority Processing at checkout to fast-track manufacturing — approximately 10–20 business days to delivery.

Returns

14 days from receipt to initiate a return. A 20% restocking fee applies to returns or exchanges not due to defect or damage. To start a return, email .

A standard 1-year manufacturer warranty is included. Extend to 2, 3, or 5 years total coverage at checkout.

Protection coverage
  • Manufacturing defects — faults in materials or workmanship
  • Electrical issues — electrical component failures under normal use
  • Finish defects — premature flaking, pitting or discoloration
  • Not covered — accidental or physical damage, moisture and corrosion, normal wear and tear, and light bulbs
Simple claims process
  1. Contact our support team via email.
  2. Provide your order details and a description of the issue.
  3. Receive a decision within 48 hours. If approved, we ship a replacement at no cost to you.
How it's made

Die-cast bodysealed at every aperture

Die-cast aluminium forms in one piece rather than assembled from sheet sections, which removes the seam points where moisture can enter over time. The Alcove's IP54 gasket seal runs around each aperture independently, keeping the electrical components dry even in sustained rain. The matte powder coat is applied post-forming, bonding to the aluminium surface rather than sitting on top — so it doesn't peel when the metal expands and contracts through outdoor temperature cycles.

Innovative engineering · intelligent design
Three reasons the Alcove holds up outside.
IP54 seal

Rated for rain and dust — suitable for patios, balconies, entrances, and courtyards.

Triple spread

Three apertures cast light across a wider area than a single-point fixture at the same wattage.

Maintenance-free

50,000-hour integrated LED — no outdoor bulb changes for the foreseeable future.

In a few words
IP54 waterproofTriple apertureMatte black finishLong LED lifeCompact flat profile
Frequently asked

Orders are processed within 2–5 business days. Delivery takes 15–21 business days in most regions. A tracking number is provided once dispatched.

The Alcove wall-mounts with included hardware, but the wiring connects to a mains circuit. We recommend installation by a certified electrician, particularly for outdoor circuits which require correct weatherproofing at the connection point.

Yes — the IP54 rating means the Alcove is protected against rain and dust ingress. It handles sustained wet conditions without damage to the internal components.

The integrated LED draws 8W. At 6 hours of evening use, that is less than 50 Wh per day — significantly less than equivalent halogen fixtures delivering a similar spread.

Yes — wall anchors and mounting screws ship with the lamp. Your electrician will need appropriate outdoor cable and conduit for the mains connection.

The three-aperture layout creates a horizontal band of light that reads as considered rather than functional. The matte black finish sits well against rendered, brick, or timber exterior walls without competing with the architecture.

The integrated LEDs are rated at 50,000 hours. At 6 hours per night, that is over 22 years before output meaningfully degrades — essentially maintenance-free.

No specialist maintenance required. Wipe the exterior with a damp cloth once or twice a year to clear dust and debris from the apertures. The sealed construction handles everything else.

Yes — the Alcove operates on 90–260V, covering residential and commercial wiring voltages in virtually all countries. No transformer or adapter required.

IP54 means the lamp is protected against dust particles large enough to affect operation and against water splashing from any direction. In practice, it handles rain, sea spray, and condensation without any degradation of the electrical components.

Trade program

Design professionals, this one's for you.

Access trade pricing, priority sourcing, and a dedicated account manager. Built for interior designers, architects, and developers procuring at scale.

Apply for trade access →
You may also like
Loading recommendations…
Free worldwide shipping
On every order, no minimum
1-year warranty
Covered against defects
14-day returns
Hassle-free, no questions
Live order tracking
Know exactly where it is